+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: SD card not showing graph info. (/Thread-SD-card-not-showing-graph-info)
SD card not showing graph info. - Nightynite - 11-18-2020
Today I went to down load my SD card to Oscar like many times before and no graph info showed up.
Only the info on the left side of the screen. Like pressure, AHI ,ect. There’s plenty of room on the card.
Anybody have any idea on what’s going on. Thank you.
[attachment=28182]
RE: SD card not showing graph info. - staceyburke - 11-18-2020
check your write protect is slid back, (on your card) if it was moved forward it is write protected. It has happened to me at least 3 times.
RE: SD card not showing graph info. - Nightynite - 11-18-2020
Stacey, That was the first thing I checked and it was in the unlock position. Any other thoughts?
Thanks
RE: SD card not showing graph info. - Jeff8356 - 11-18-2020
Couple of other possibilities...
The SD card didn't seat properly when you put it back in the machine?
SD cards can go bad without warning. If you have a spare SD card lying around, try that tonight.
Any power interruptions during the night? Sometimes a quick power blip can make your machine do strange things. Try unplugging your xPAP for a few minutes, then plug it back in.
RE: SD card not showing graph info. - Nightynite - 11-18-2020
Ok Jeff, I’m going to try tonight your suggestions. Thanks so much!
RE: SD card not showing graph info. - Nightynite - 11-18-2020
It’s just weird that it would record the basic summary info and not be able to use that info for the graph portion.
RE: SD card not showing graph info. - RNeil - 11-27-2020
I have the same problem sporadically. I do not touch the write protect switch. I keep it in the unlocked position. I have not had the problem in a long time. Today I opened Oscar and it said I had not used my machine in 8 days. I imported the data and I got the last 8 days without the detail data. I ejected the card, reinserted it and imported the data again. Now I have the detail data.
I think the problem is the SD slot on my computer. I think I will get the kind of card reader that plugs into USB.
RE: SD card not showing graph info. - Nightynite - 11-28-2020
I unplugged my machine like Jeff suggested above the next night and then it worked. Don’t know if that really worked or not but I liked it. Thanks again Jeff
RE: SD card not showing graph info. - SideSleeper - 11-29-2020
My husban'ds Airsense 10 skips fairly often. SD card unlocked. I usually just got back to the machine, insert the SD card and let it catch up, then remove and the data is there on the second try with OSCAR.