+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum)
+--- Thread: Can't see last night results in OSCAR (/Thread-Can-t-see-last-night-results-in-OSCAR)
Can't see last night results in OSCAR - TonyVier - 12-05-2020
Hi,
as the title says, I can't see last night results in OSCAR, only 2 days prior ?? (phone gives results ok)
Saturday today, see results only from thursday, so tomorrow I can see results of friday ....
FYI:
Wednesday from Smartlink on phone: :[attachment=28501]
Wednesday from OSCAR: [attachment=28502]
RE: Can't see last night results in OSCAR - staceyburke - 12-05-2020
See if the write protect tab has moved and it is read only. That happened to me just the other day. On my card the tab (left side of the card) slides up to write and down to protect.
RE: Can't see last night results in OSCAR - OpalRose - 12-05-2020
Your SD card may be corrupt. Have you tried a new card? Other than that, I'm not sure why you aren't seeing results in OSCAR. Also, the card must be in the Cpap while sleeping. Hopefully, others will have some advice, and check the protect tab as Stacy suggested.
With that said, is that chart representative of your normal daily data? If so, you need some adjustments to your pressure settings.
On a second look, that chart is from March, 2020???
Repost your data over in the Main Forum for some advice. The first thing I would do is raise minimum pressure a bit and also use the SmartFlex feature on your machine.
SmartFlex is designed to decrease pressure during exhalation 1, 2, or 3 cm for a more comfortable breathing pattern during therapy.
RE: Can't see last night results in OSCAR - TonyVier - 12-05-2020
The data is from december, not march...
And... the card is not write protected......
Should the card be IN the machine while in use? When I empty the card, and put it in, the machine writes all but the last 2 days on the card (or oscar doesn't read the last two days) . Then I take it out, and the machine says "Send to provider".
RE: Can't see last night results in OSCAR - TonyVier - 12-05-2020
Quote:Repost your data over in the Main Forum for some advice
I don't how much data from OSCAR can be trusted, from reading other posts.... There is also quite a difference from what the Phone App says, and OSCAR...
Although my feeling is that the Phone App is more positive than OSCAR...
RE: Can't see last night results in OSCAR - OpalRose - 12-05-2020
(12-05-2020, 09:39 AM)TonyVier Wrote: The data is from december, not march...
And... the card is not write protected......
Should the card be IN the machine while in use? When I empty the card, and put it in, the machine writes all but the last 2 days on the card (or oscar doesn't read the last two days) . Then I take it out, and the machine says "Send to provider".
Sorry, I stand corrected on the date... you still need to take some action on better treatment. Your AHI is too high.
And yes, the card must be in the machine and unlocked while using.
[attachment=28503]
RE: Can't see last night results in OSCAR - TonyVier - 12-05-2020
(12-05-2020, 09:52 AM)OpalRose Wrote: Your AHI is too high.
Yet, the Phone App from Devilbiss has a much lower AHI ????
RE: Can't see last night results in OSCAR - OpalRose - 12-05-2020
Yes, I noticed the difference. I can't explain that as I don't know how Devilbiss reports data. But OSCAR will only report what the machine writes to the card.
RE: Can't see last night results in OSCAR - Crimson Nape - 12-05-2020
Most machine brands have limited memory storage and require the SD card to be in the CPAP while the detailed data is collected. Usually only summary data will be reported if the card isn't in the machine while it is in use.
OSCAR only reports data that it collected from the SD card, nothing else.
RE: Can't see last night results in OSCAR - GuyScharf - 12-05-2020
Devilbiss DV64 support was never completed in SleepyHead, from which OSCAR is derived. No one has worked on Devilbiss support since OSCAR was forked from SleepyHead. The flags and AHI calculations in OSCAR do not agree with the machine because additional analysis and reverse engineering is required.
See http://www.apneaboard.com/forums/Thread-Large-differences-in-AHI-between-Oscar-and-DeVilbiss-reason-see-post-7?pid=294221#pid294221 for more details.
We need a skilled C++ and QT developer to take on that project. We've had no volunteers so far.