Setting up a PR System One 560 Aflex - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: Setting up a PR System One 560 Aflex (/Thread-Setting-up-a-PR-System-One-560-Aflex) |
Setting up a PR System One 560 Aflex - Efisher53 - 07-03-2021 Hi, I have a PR System One 560P Auto AFlex that I have been using since I was diagnosed in 2015 with severe OSA. I have had no issues or complaints with the machine. I bought a backup(.same model) on EBay in 2019 that I have never used. Since the backup only has 2800 machine hours and mine as 16809, I thought now with the recall I should switch to the lesser used one until PR decides what they are doing with the recalled machines. Before I reset all the info using the clinician setting to match what was on mine, do I need to Reset Info Data before changing the settings? Does anyone know what the System Lock is for? I can’t find any reference to it in the owner’s manual. Once everything is changed in the Clinician Setup,is the prescription settings from the previous owner wiped out? Thank you for any help, I’m a little nervous that I’ll mess something up. RE: Setting up a PR System One 560 Aflex - OpalRose - 07-03-2021 It's been awhile since I've used the 560, but if I remember correctly, there should be a "Reset Data" area to click on. This should reset any previous patient hours back to 0, but does not change the machine hours. After you reset the the previous patient data, then go ahead and plug in your settings. RE: Setting up a PR System One 560 Aflex - Efisher53 - 07-03-2021 Thank you for a quick response OpalRose, I appreciate it and will sleep easier tonight! RE: Setting up a PR System One 560 Aflex - OpalRose - 07-03-2021 Good luck! |