+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [Equipment] S9 VPAP ADAPT Change Settings? (/Thread-Equipment-S9-VPAP-ADAPT-Change-Settings)
S9 VPAP ADAPT Change Settings? - babydoc01 - 06-06-2013
ResMed S9 VPAP SV Adapt--Can anyone tell me how to access the settings or setup screen so that I can change to type pf mask from nasal to full face?
RE: S9 VPAP ADAPT Change Settings? - jgjones1972 - 06-06-2013
I'm not sure, but if it is like other S9s you should be able to change it just by clicking the double checkmark button, turn knob to scroll down to mask, click knob then turn knob till it says "full face", then click knob again to set. If you can't get to it from main menu, just hold the knob button and double check mark button down simultaneously for a few seconds in order to get into the clinicians menu. From there, in setting (two gears) just turn the knob to scroll down to "mask", click knob, turn knob to select, click - done.
If it's different for the VPAP ADAPT hopefully someone who has one can chime in.
RE: S9 VPAP ADAPT Change Settings? - zonk - 06-06-2013
clinical manual is available via email: http://www.apneaboard.com/adjust-cpap-pressure/change-cpap-pressure-settings-adjusting-your-machine-with-a-clinician-setup-manual
S9 setup: http://www.apneaboard.com/resmed-s9-cpap-setup
As jgjones1972 suggested, all S9 series machines have the same functions
See page 8 to select mask type http://www.resmed.com/us/assets/documents/product/s9_vpap_st/welcome_guide/368436r2_s9-vpap-auto-st-s-h5i_welcome-guide_amer_eng.pdf
RE: S9 VPAP ADAPT Change Settings? - trish6hundred - 06-06-2013
Hi babydoc01,
WELCOME! to the forum.!
Hang in there for more responses to your post.
RE: S9 VPAP ADAPT Change Settings? - babydoc01 - 06-06-2013
(06-06-2013, 05:44 PM)babydoc01 Wrote: ResMed S9 VPAP SV Adapt--Can anyone tell me how to access the settings or setup screen so that I can change to type pf mask from nasal to full face?
Thank you for the information on which buttons to click and how to hold them together. I fixed the setting I needed to.