+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Sd card and resumed AS11 (/Thread-Sd-card-and-resumed-AS11)
Sd card and resumed AS11 - Deweym - 11-07-2021
I started using the Resmed AS11 recently.
Since it didn’t come with a SD card I used the one in my AS 10 machine. Since then I get this message each day. “Mode and pressure settings missing; yesterday’s shown”.
Can anyone tell me what’s going on?
I am using Oscar v. 1.3.0.
Also Oscar still says I am using the AS 10 machine.
RE: Sd card and resumed AS11 - Crimson Nape - 11-07-2021
Did you reformat the card prior to using it in your new machine? If not, I suspect that it is picking up legacy files on the card.
RE: Sd card and resumed AS11 - GuyScharf - 11-07-2021
As Crimson Nape suggests, the best approach is to use a fresh, or freshly-formatted, card in the AS11.
As a work-around and to preserve existing data, look at your SD card. You probably have files named identification.tgt and identification.json. Rename the "identification.tgt" file to something else, like "as10-identification.tgt." If you don't have an identification.json file, something else is wrong. Let us know if that is the case.
OSCAR should now pick up your AS 11 data.
RE: Sd card and resumed AS11 - Deweym - 11-07-2021
Ok I have renamed the tgt file. I will see what happens tonight.