+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: How do I remove the diffuser on the F20 Quiet Air elbow? (/Thread-How-do-I-remove-the-diffuser-on-the-F20-Quiet-Air-elbow)
How do I remove the diffuser on the F20 Quiet Air elbow? - UncollapseMeThroat - 09-28-2022
How do I remove the diffuser on the F20 Quiet Air elbow? Thanks!
RE: How do I remove the diffuser on the F20 Quiet Air elbow? - Melman - 09-28-2022
Do you want to remove the fiber packing from the diffuser or the entire diffuser so that no air blows out? I believe others have removed the packing by teasing it out through the holes with a fine needle or wire. I don't believe the diffuser itself can be removed from the elbow. I have the F20 with the same elbow. As you probably know, the diffuser is necessary to prevent you from rebreathing your exhaled air.
RE: How do I remove the diffuser on the F20 Quiet Air elbow? - UncollapseMeThroat - 09-28-2022
Hi and thanks. I'd like to remove the "covering" that's over the holes, aka the lint trapper. Is that even possible? Would it ruin the elbow?
RE: How do I remove the diffuser on the F20 Quiet Air elbow? - Jeff8356 - 09-28-2022
Removing the fibrous material under that ring is possible. Just tedious. A small paperclip or pin should work.
It's possible that will also make the mask noisier as there will no longer be anything to muffle the sound of the air exiting the vent holes.
Any particular reason you want to remove it?
I would suggest getting a second elbow before you start doing anything with this one. At least you will have a spare in case anything goes wrong.
RE: How do I remove the diffuser on the F20 Quiet Air elbow? - UncollapseMeThroat - 09-28-2022
Thanks. I have two or three older-generation elbows that we like. My husband and I (we both use cpap) don't want to bother with the lint guard (or cover, it's called?) and picking stuff out on the newer-generation elbow. I'm wondering if the cover is removed, then would it be much like the older-generation elbows ... maybe not, but thought that we'd try. Sounds like it's not advised?
RE: How do I remove the diffuser on the F20 Quiet Air elbow? - snorin2 - 09-28-2022
1. Use a box cutter and cut the diffuser "cover" in a very small half circle ON the "bottom" so to speak where the elbow diffuser would be at just above or below your lip. I think if you cut it on the "top", the increased air stream (if any) could go into your eye. I think so but I have no proof--just my thinking. You think this is going to be difficult, but the diffuser plastic cuts like cheese! Start small and increase the size of the semi-circle hole if you need to. I think you should leave at least 1/2 of the diffuser cover.
2. Cut the diffuser packing material once in the middle of the semi-circle opening you made. You don't have to be perfect--just hack it or cut it with the point of the box cutter---a small box cutter is best for this job.
3. Use some sort of pic (I used a dental pic from the dollar store) and stab one of the cut ends of the packing and just pull it out. It just swings around the diffuser without any resistance. You'll be amazed and vow next time to make the hole smaller!
RE: How do I remove the diffuser on the F20 Quiet Air elbow? - UncollapseMeThroat - 09-28-2022
Thanks!