+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [Equipment] EPR (/Thread-Equipment-EPR)
EPR - Roham - 08-05-2013
Dear Friends
Any body may let me know more about EPR in Resmed S9?
I know it's somehow related to making exhale easier, but what's the logic of numbers 1-2-.. and "patient" mode?
I feel to have better sleep on patient mode, but how it works?
And why my upper pressure in the morning always reads quite near to the Max Setting in APAP mode? may it mean i'm currently on a low setting?
Thanks
RE: EPR - trish6hundred - 08-05-2013
Hi Roham,
WELCOME! to the forum.!
Yes EPR is for when you breathe out and there are three different levels you can select, or you can turn it off if you decide that you don't like it, its a comfort feature.
Hang in there for more answers to your question and best of luck.
RE: EPR - RonWessels - 08-05-2013
EPR is indeed a pressure relief for exhale. The 1,2,3 values are measured in cmH2O, the same way that the pressure is measured. For ResMed machines, when the machine detects an exhale, it will reduce the pressure by the EPR value from its current setting (down to a minimum of 4) until the next inhale is detected. [ For Philips Respironics machines, it will reduce the pressure by the *Flex setting until the end of the exhale is detected. ]
According to your profile, your pressure range is extremely narrow (from 14.2 to 15 cmH2O). It's not surprising that the limits will be reached. Personally, my pressure needs do range all the way from 11 cmH2O to around 19 cmH2O, depending on my sleep position, the phase of the moon, etc.
RE: EPR - SuperSleeper - 08-05-2013
From the Apnea Board Wiki:
http://www.apneaboard.com/wiki/index.php?title=Exhalation_pressure_relief
RE: EPR - zonk - 08-05-2013
(08-05-2013, 04:17 PM)Roham Wrote: Dear FriendsResMed EPR http://www.resmed.com/us/assets/html/device_epr/epr.html?nc=patients
Any body may let me know more about EPR in Resmed S9?
RE: EPR - JOHN KREMER - 08-17-2013
The "patient" setting allows control of the EPR from the patient interface in addition to the clinician interface. Level 1= mildest reduction in air pressure, level 2= mid reduction and level 3 the largest reduction in air expiratory pressure.
RE: EPR - vsheline - 08-17-2013
(08-05-2013, 06:00 PM)RonWessels Wrote: [For Philips Respironics machines, it will reduce the pressure by the *Flex setting until the end of the exhale is detected. ]
Actually, for Philips Respironics machines Flex only reduces the exhale pressure during a small portion of the exhale period.
Philips Respironics A-Flex and C-Flex and at least one type of Bi-Flex, unlike ResMed EPR, stop way before the end of the exhale is detected. This is done on purpose so that the pressure will return to the higher inhale pressure well before the patient starts to inhale. The start of inhalation is the easiest time for the airway to collapse, because of the suction created by an attempt to inhale.
This is why some doctors consider Flex to give more effective treatment for obstructive sleep apnea than EPR. But it is also why, unlike EPR, Flex can be annoying and can take a while to get used to.
Take care,
--- Vaughn
RE: EPR - PaulaO2 - 08-17-2013
(08-17-2013, 01:26 PM)JOHN KREMER Wrote: The "patient" setting allows control of the EPR from the patient interface in addition to the clinician interface. Level 1= mildest reduction in air pressure, level 2= mid reduction and level 3 the largest reduction in air expiratory pressure.
The numbers correspond to the pressure. A setting of one means it drops the exhale one cmH2O, two drops 2, 3 drops 3.
So if your inhale (treatment pressure) is 10 and you have it set to an EPR of x, the exhale would be:
1 = 9 exhale
2 = 8
3 = 7.