Apnea Board Forum - CPAP | Sleep Apnea
Sudden incomplete data from AirSense 11 import - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum)
+--- Thread: Sudden incomplete data from AirSense 11 import (/Thread-Sudden-incomplete-data-from-AirSense-11-import)

Sudden incomplete data from AirSense 11 import - geosyncline - 02-21-2023

Hi All,

A little over a week ago OSCAR started only showing 9 out of 14 graphs of data when imported from my AirSense 11.  Sessions prior to that day have complete data with 14 graphs, but afterwards, incomplete with only 9 graphs.

This happens to coincide with taking my machine into my DME's office for a routine followup. They changed the pressure settings in front of me (I often change the pressure settings on my own based on events + advice from here) with the machine only being plugged in at their office for less than 5 minutes, if even that. The reduced number of graphs started immediately that night. I don't know if it's causation or coincidence.

The following graphs and information are now missing from OSCAR on new sessions, even though summary data shows up in the MyAir app:
  • Event Flags
  • Pressure
  • Leak Rate
  • Snore
  • Time At Pressure
  • AHI (for whole night)
  • Flow Limit
The graphs / information that are still showing up in OSCAR are:
  • Event Flags (but it's empty)
  • Flow Rate
  • Mask Pressure
  • Tidal Volume
  • Minute Vent.
  • Insp. Time
  • Exp. Time
  • Resp. Rate
  • AHI (but it's empty)
I've checked the SD card and it tests fine, and even re-formatted it.  I've also re-set the CPAP to factory defaults / erased all data and still, no change in this behavior.

Thoughts?

Thanks!