+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum)
+--- Thread: New Router Lost FlashSD Connection (/Thread-New-Router-Lost-FlashSD-Connection)
New Router Lost FlashSD Connection - gumleafau - 03-27-2023
My old router damaged by storm and I replaced it with DLink-882 router.
In the CONFIG file I change the IP address to 192.168.0.130 (Attachment 1).
In Attachment 2 is a screenshot is detail of my Internet Connection from the new router.
Please help me to re-connect to the FlashSD of my wife's Resmed Aircurve 10Vauto!
[attachment=49319]
[attachment=49317]
RE: New Router Lost FlashSD Connection - Jeff8356 - 03-27-2023
In your router settings you may need to set that IP address as reserved in the DHCP settings.
You can also remove the card from you xPAP for a few minutes, then place it back in. That gets the card to reboot.
RE: New Router Lost FlashSD Connection - Crimson Nape - 03-28-2023
Each time you edit the FlashAir SD card's CONFIG file, you must replace the asterisks (*****) with the password in the APPNETWORKKEY parameter. Otherwise, the asterisks themselves become the password entry. Also, is your router's SSID named, "Gary's Wi-Fi Network"? Previous models do not like spaces in the SSID. Are you able to connect wirelessly to the router with other devices?
I see you have used the 192.168.0.x network in your card for its IP. Have you verified that this is the network address range being used by your router? Your posted image only shows the WAN address and not the LAN IP range.
- Red