+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum)
+--- Thread: "Mode and pressure settings missing; yesterday's shown." (/Thread-Mode-and-pressure-settings-missing-yesterday-s-shown)
"Mode and pressure settings missing; yesterday's shown." - manders513 - 08-06-2023
Hi! I was using a Resmed Airsense 11 and then began using a Vauto. The first VAuto import seems to have messed up my OSCAR data? Going back to 8/2 (a few days before I started VAuto), I'm getting the red (Mode and pressure settings missing; yesterday's shown.) on each day starting at 8/2. I saw another thread about this and tried to purge the data on 8/2 and re-import, but it's still there. I also purged and re-imported 8/4 (first day of VAuto). Do I need to purge each day (8/2, 8/3, 8/4, 8/5) and then re-import?
Screenshot of the first night I imported the VAuto data (note that it still says AutoSet and the wrong settings):
[attachment=52921]
Thanks!
RE: "Mode and pressure settings missing; yesterday's shown." - Crimson Nape - 08-06-2023
A Resmed AS11 is an auto CPAP and not a VAuto Bi-level machine. Although, I see you seem to have an EPR of 4, which shouldn't be. The maximum EPR has always been 3. Have you or someone else hacked the AS11's code?
-- Red
RE: "Mode and pressure settings missing; yesterday's shown." - manders513 - 08-06-2023
Hi! No, that night I was using the VAuto, OSCAR is just displaying my previous machine (AS 11) for whatever reason. That's my issue--the VAuto settings aren't showing up in OSCAR. I was using the AS11 and then on 8/4 I started using the bi-level, but I'm getting that error and it's showing the previous machine and settings. Thanks!
RE: "Mode and pressure settings missing; yesterday's shown." - Crimson Nape - 08-06-2023
The AS11 and the VAuto have different file structures and should be in separate user profiles. Since most users will be upgrading to a AS11 from a AS10, the OSCAR code was written to ignore the older data files if the newer file extensions were read.
While I'm thinking about it, if you use the same SD card in both machines, you will need to format it prior to using it in the other machine.
-- Red
RE: "Mode and pressure settings missing; yesterday's shown." - pholynyk - 08-06-2023
As Red said, if there is an Identification.json file from as as!! machine, OSCAR will treat the card as an AS11 card and get confused as it finds AS10 data in the same name files.
The solution is to use two cards, one for each machine.
As long as both machines are from the same manufacturer, OSCAR can use a single profile for both machines.
RE: "Mode and pressure settings missing; yesterday's shown." - manders513 - 08-06-2023
Thank you both! I have another SD card so I just put that one in the VAuto. Fingers crossed! I also made a separate profile, just in case. Thanks!