Apnea Board Forum - CPAP | Sleep Apnea
OSCAR 1.5.1 Windows 10 - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum)
+--- Thread: OSCAR 1.5.1 Windows 10 (/Thread-OSCAR-1-5-1-Windows-10)

OSCAR 1.5.1 Windows 10 - sleeper2460 - 11-01-2023

I downloaded OSCAR 1.5.1 and got this message when I opend the file:
 This XML file does not appear to have any style information associated with it. The document tree is shown below.

<devicereplay oscar="1.5.1+master-dd495e23"/>

Can anyone help me get the program to work. I have only moderate computer shills.

RE: OSCAR 1.5.1 Windows 10 - Crimson Nape - 11-01-2023

Hi sleeper2460!  -  Welcome

What XML file?  The install file should be an "EXE" file.  Please run a SHA256 checksum on your download and compare its results to the one you downloaded, as listed in the OSCAR Downloads > Documents > SHA256 Checksums for all installers.

Here is a quick link to this file:  https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-checksums.txt

A little tip, since the checksum values are about a half-mile long, look at the 5 last digits first.

To help check the file, here are the steps for Windows 10 users:
    Using Command Prompt
  1. Press Windows+R to open the Run box
  2. The Command Prompt window will open.
  3. Run the following command:
    certutil -hashfile C:\file\path\OSCAR-1.5.1-Win64.exe SHA256
    Make sure to replace C:\file\path\OSCAR-1.5.1-Win64.exe with the actual path to the file.
  4. Compare the generated value to the checksum of the file to the one in the OSCAR-1.5.1-checksums.txt file.
    Using Power Shell
  1. Press Windows+R to open the Run box
  2. Type powershell and click OK.
  3. The Windows PowerShell window will open.
  4. Run the following command:
    Get-FileHash C:\file\path\OSCAR-1.5.1-Win64.exe -Algorithm SHA256
    Make sure to replace C:\file\path\OSCAR-1.5.1-Win64.exe with the actual path to the file
  5. Compare the generated value to the checksum of the file to the one in the OSCAR-1.5.1-checksums.txt file.

Good luck!
- Red

RE: OSCAR 1.5.1 Windows 10 - SuperSleeper - 11-01-2023

Probably obvious, but just in case, make sure you're downloading OSCAR from the Official Download page, here:

https://www.sleepfiles.com/OSCAR