Apnea Board Forum - CPAP | Sleep Apnea
[CPAP] I cannot keep my mask on, and I'm thinking of returning the machine. - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [CPAP] I cannot keep my mask on, and I'm thinking of returning the machine. (/Thread-CPAP-I-cannot-keep-my-mask-on-and-I-m-thinking-of-returning-the-machine)



I cannot keep my mask on, and I'm thinking of returning the machine. - blakeh36 - 11-12-2023

Hello,

I (24M) can only seem to keep my cpap on for ~3 hours/night. Most of the time, it's a conscious decision, although I don't remember the reasoning. One time it was due to rain-out, and another was because I felt a bit "suffocated." I fixed the rainout issue, so I think the latter is the main problem.   

Still, I need to sleep 4 hours with it 70% of the night for insurance. Given that my condition is mild (7 events/hour), I wonder how much I would benefit from the machine. This is why I'm thinking of returning the machine. 

I've attached my oscar data from last night (I didn't know I needed an SD card to retrieve the data; otherwise I would include more). Do you see anything that may be the issue? Furthermore, would you say that the data suggests my life would significantly improve if I used a cpap machine?

Thanks!


RE: I cannot keep my mask on, and I'm thinking of returning the machine. - SarcasticDave94 - 11-12-2023

Welcome to Apnea Board,

A few things you might want to try:

1. Run the CPAP during the day (when you're not intending to sleep that is), watching TV, etc. in an attempt to get used to CPAP and the mask

2. EPR 3 needs a minimum pressure of 7, consider trying that, you can access the pressure setting via push and hold of Home and Dial for 5 seconds, then scroll to Min that's currently 5 and edit to 7

3. There's occasional leaks that may be disrupting rest, check the wiki on mask adjustment, try MASK PRIMER to start