Apnea Board Forum - CPAP | Sleep Apnea
Question about Bilevel setting - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Question about Bilevel setting (/Thread-Question-about-Bilevel-setting)



Question about Bilevel setting - yankees123 - 12-10-2023

I have a vauto unit and was thinking about trying the “S” mode.  Is it true in s mode it doesn’t display a graph of flow limitation?  If that is so is there a way to display it?


RE: Question about Bilevel setting - Crimson Nape - 12-10-2023

You are correct. The workaround is to use the auto mode, setting the max setting to equal the sum of minimum pressure and the PS value.

- Red


RE: Question about Bilevel setting - PeaceLoveAndPizza - 12-10-2023

As Crimson Nape said, that is the best of both worlds. 

Here are my settings:

Mode Vauto
Min EPAP 8
Max IPAP 12
PS 4


RE: Question about Bilevel setting - yankees123 - 12-10-2023

So to understand, on S mode there is no data at all for flow limitations?


RE: Question about Bilevel setting - Sleeprider - 12-10-2023

Correct


RE: Question about Bilevel setting - PeaceLoveAndPizza - 12-10-2023

Gideon posted this a while back.

https://www.apneaboard.com/forums/Thread-Nothing-showing-up-in-flow-limitation-chart-on-BiPAP-S-mode-on-AirCurve-10-VAuto?pid=419108#pid419108


RE: Question about Bilevel setting - yankees123 - 12-10-2023

Thanks everyone, I guess looking at Peacelove her settings are actually  mimicking s mode but using the vauto mode correct?


RE: Question about Bilevel setting - PeaceLoveAndPizza - 12-10-2023

That is correct. It is effectively running like it is set to S mode.


RE: Question about Bilevel setting - yankees123 - 12-10-2023

Thanks for the explanation.