+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum)
+--- Thread: OSCAR, how to switch to a new device? (/Thread-OSCAR-how-to-switch-to-a-new-device)
OSCAR, how to switch to a new device? - edgnoj - 02-07-2024
I have searched on this forum, but have not come across the answer to my question:
What do you need to change in OSCAR when you switch from a Resmed Autoset 10 to a Resmed 10 Vauto? Is this new device automatically recognized in your current profile or is it better to create a whole new profile?
RE: OSCAR, how to switch to a new device? - Crimson Nape - 02-07-2024
Since they are of the same brand CPAP and series (10), you can continue with your existing profile.
- Red
RE: OSCAR, how to switch to a new device? - edgnoj - 02-07-2024
That helps, thanks!
RE: OSCAR, how to switch to a new device? - pholynyk - 02-08-2024
You must use a new SD card in the new machine - or at least format the old one before reuse. Each machine writes its serial number in a file at the root of the SD card. Things will get very confused if two machines write data to the same SD card.
RE: OSCAR, how to switch to a new device? - glenncol - 02-10-2024
When switching from a ResMed AirSense 10 AutoSet to a ResMed AirCurve 10 VAuto in OSCAR, you typically don't need to create a new profile. OSCAR is designed to recognize different CPAP and bilevel devices from the same manufacturer and seamlessly transition your data.