+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [CPAP] New to Oscar (/Thread-CPAP-New-to-Oscar)
Pages:
1
2
New to Oscar - Kinnu - 04-02-2024
Hello,
I have noticed in my Web version of MyAir that I have a large leakage somewhere on my CPAP. I'm unsure where, as I cannot feel anything around the machine, hoses, etc. I was told on this site to try Oscar and I was finally able to get an SD card and a reader. Ill upload the past 3 days, Ive only had the card for about a week. I can include more if needed.
So Im here to see if I can confirm maybe a mouth leak or something? Also, if things look "Normal" or if something is concerning? I know you are not doctors etc, but I was just looking for a bit of info if possible.
Thank you,
RE: New to Oscar - Phaleronic - 04-02-2024
Hi Kinnu,
Welcome to the forum. You are having quite a bit of leakage in those charts. I see you're using a nasal mask, are you also using a chin strap to keep your mouth closed at night? If not you will need to do so or think about switching over a full face mask setup (or hybrid). For now I would raise your min pressure to 7cm, turn EPR up to 3 and lower max pressure to 15cm, try those settings for a few nights and look at the charts again.
RE: New to Oscar - Kinnu - 04-02-2024
I did try the strap but had issues. I have a full face mask as well but I don't feel the air as easily like I do with the nasal. Ill try again a few more days with those settings.
Ty ^^
RE: New to Oscar - Phaleronic - 04-02-2024
I couldn't use a strap either (had to switch over to a resemd F20 airfit system)-please let us know how you feel too after a night or two
RE: New to Oscar - staceyburke - 04-02-2024
I don't disagree with what answers you were given but let me explain a little bit. Flow limits are what drives up your pressers. If we keep the pressure down you should be able to control the leakage. That has to be controlled to do any type of therapy.
I would suggest
min 8
EPR full time
EPR 3
max 10
RE: New to Oscar - Deborah K. - 04-03-2024
You might also consider mouth tape. Many of us find that helps better than anything else at stopping mouth leaks.
RE: New to Oscar - Kinnu - 04-03-2024
No mouth tape seemed to work for me. It would slip off.
RE: New to Oscar - Deborah K. - 04-05-2024
Lots of people on this list use and like Cover-Roll Stretch tape, two inches wide. Here's a link:
https://www.amazon.com/dp/B0015TK62C?ref=nb_sb_ss_w_as-reorder_k0_1_10&=&crid=30KLG9CECU2B6&=&sprefix=cover+roll
I like this kinesiology tape myself. It's way more expensive, but I just like it and find it more comfortable. Here's a link to it:
https://www.amazon.com/dp/B00T4PKE94?ref=ppx_yo2ov_dt_b_product_details&th=1
Neither of these comes off. Whatever you try make sure it is two inches wide. I cut a piece about 5 or so inches long. If I use narrower or shorter tape it leaks.
RE: New to Oscar - Expat31 - 04-05-2024
Hello,
You currently have an enormous level of leaks, and I would suggest your graphs are currently unreliable in this high leak environment.
My opinion is to resolve this problem first. Then to be able to tackle the remaining issues.
Mouth taping I believe is a good solution.
I have found personally the best rules to achieve successful taping is to:-
1. Use baby wipes around the taping area just before bed (soap and water not really efficient enough).
2. Find the best mouth "pursing" method to ensure your mouth is well closed.
3. Make sure the corners are well covered, pressing down firmly.
4. Wait at least 15 minutes like this before donning your mask, thus allowing the adhesive to "settle" before pressurising the system.
I am clean shaven, but I still have a quick second shave around the taping area before bed.
RE: New to Oscar - HalfAsleep - 04-05-2024
If it were me, I'd get a hybrid FF mask (e.g. F30) and get the numbers dialed in better. Then, trying switching to the nasal mask, dealing with tape, etc..
Otherwise, you'll be dealing with too many variables at once, IME. And if you're just getting used to the whole machine, it's a lot.