Apnea Board Forum - CPAP | Sleep Apnea
[Symptoms] ASV Flow Limits - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [Symptoms] ASV Flow Limits (/Thread-Symptoms-ASV-Flow-Limits)



ASV Flow Limits - kshvine - 05-14-2024

[attachment=64062][attachment=64060]

I was an AirSense 10 APAP user for about a decade, I just (couple of weeks ago) graduated to an AirCurve 10 ASVAuto due to massive numbers of CA events I was having in the morning hours. I've played around with pressure support values but I seem to have a lot flow limitations and I'm not sure why.  Suggestions welcome.  The ASV can get pretty aggressive in the morning hours when I usually have lots of CA.  I treated CA with supplemental O2 for years and am still using because my spO2 levels can dip down below 88% occassionally.  I am concerned the ASV pressure aggressivness may be limiting the O2 concentrator injection (Climate Line Oxy nipple so the injection is at the egress fitting on the AirCurve and not up near the mask).

Please pardon any forum transgressions, I was having trouble with attachements (I'm the slowest kid on the block).


RE: ASV Flow Limits - SarcasticDave94 - 05-14-2024

Unfortunately, you won't get flow limits to match your former CPAP on the ASV. As the ASV treats Central Apnea with its unique algorithm, it's going to cause the flow limits to appear. However in this case, it's a by-product of treatment not a lack of it. You'll likely drive yourself crazy attempting to adjust pressures to fix it. You're going to be best served to adjust the ASV to treat the other events, especially CA, and it may then be adjusted for comfort.


RE: ASV Flow Limits - unadvisedfun - 05-17-2024

You’ve got a lot of leaking going on. Try to get that leaking under control first: if you have a nasal mask consider mouth taping. You may also benefit from a higher minimum pressure support setting but it is hard to tell with the leaks.