+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: AirSense/Curve 10 jumper cable needed (/Thread-AirSense-Curve-10-jumper-cable-needed)
AirSense/Curve 10 jumper cable needed - PappaJoe - 07-20-2024
After obtaining aResmed Aircurve 10 I attempted to give it a thorough cleaning. During that process i broke the black connector end of a jumper. (that connects to J302 on the main board)
A Google search didn't return a source.
Has anyone got one of these or know where to look?
Thanks in advance for your assistance,
I remain,
Sincerely
Joe
RE: AirSense/Curve 10 jumper cable needed - srlevine1 - 07-20-2024
Other than using a dead donor machine for parts, that leaves an official repair facility, or you could also try a micro-soldering facility like NorthridgeFix (https://northridgefix.com/mail-in/).
RE: AirSense/Curve 10 jumper cable needed - Crimson Nape - 07-20-2024
Try checking DigiKey or Mouser Electronics more a 4 position, single row molex connector. They have images to help in finding the correct connector.
- Red
RE: AirSense/Curve 10 jumper cable needed - PappaJoe - 07-21-2024
Thanks Red and....Mr. Ustinov? for your advice.
It turns out that the cable which got broke connects the modem.
(per: "I Refurbished a ResMed AirSense 10..." by Adventures with CPAP YouTube)
Since this is to be a backup/travel machine, no need for the modem!
Another bullet dodged.
Always grateful for the tireless devotion to helping others that y'all provide and have shown my appreciation in the form of a small donation to the forum.