OSCAR 1.5.3 Import issue. - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum) +--- Thread: OSCAR 1.5.3 Import issue. (/Thread-OSCAR-1-5-3-Import-issue) |
OSCAR 1.5.3 Import issue. - kayak1 - 08-08-2024 As part of testing I uploaded data in the middle of the night last night. This AM when I attempted another import after really sleeping, I end up with the following error: 669244: Warning: Failed to open "/home/user/Documents/OSCAR_Data/Profiles/user/ResMed_23241560134/Backup/STR.edf" No new data uploads and thus OSCAR is showing 3 hours and 4 minutes of non sleep but CPAP time. To make sure it wasn't a card issue I uploaded the contents of the card to sleephq.com (see the attached screen show). This is the 2nd time I have had this issue. And would really like to fix it. If I exclude these two data issue I would be in 100% compliance in my OSCAR reports. [attachment=68032] I would also like to see the data in OSCAR as I don't normally use sleephq as I find it easy to zoom in a scroll though my OSCAR data using the arrow keys..... Thanks in advance. RE: OSCAR 1.5.3 Import issue. - Crimson Nape - 08-08-2024 Hi kayak1! - OSCAR will only load data for a day once. You need to purge that day and reimport its data. - Red RE: OSCAR 1.5.3 Import issue. - kayak1 - 08-08-2024 (08-08-2024, 08:29 AM)Crimson Nape Wrote: Hi kayak1! - Your getting a big thank you!!!! Your fix was the correct one. FYI the trouble shooting guide is incorrect and you are the correct one: I can't seem to post a URL directly as I am too new. http://www.apneaboard.com/wiki/index.php/OSCAR_Troubleshooting "Prior to OSCAR 1.2.0, OSCAR allowed one import of data per a 24-hour day. For a Resmed, a day is from noon to noon. If you import a nap session from the afternoon, then you won't be able to see any further data for that day without purging the day's data then re-importing it again. To purge a day's data; Go to the day you wish to purge in the Daily Screen, then select Data ⇾ Advanced ⇾ Purge Current Selected Day from the menus at the top. Now, you can import back in the data for that day and it should all be there." Thanks again!!! |