New user, support needed please - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: New user, support needed please (/Thread-New-user-support-needed-please) |
New user, support needed please - Katie.williams - 09-04-2024 Hello everyone. I was diagnosed with severe obstructive sleep of 35 AHI in June this year. I was provided with the ResMed airsense 10 on auto settings with a f20 cushion mask (by the nhs- a UK user) I have struggled to adapt to using the machine.i do find it difficult to sleep with. My AHIs have significantly improved though. More recently am finding I am constantly waking in the night and am finding my sleep very unrestful. I’m struggling with energy levels again. I have been looking at myOSCAR data but it looks very confusing and I’m struggling to make sense of it. When I’m constantly waking I sometimes turn the machine off and so when it starts again the pressure is low. I am Wondering if this is contributing to issues? I welcome any insight or advice available. RE: New user, support needed please - Katie.williams - 09-04-2024 Attachments included RE: New user, support needed please - Expat31 - 09-04-2024 Hello, Posting graphs is a great step. Before we get into it, can you repost just the following 5 key graphs only:- Events Flow rate Pressure Leak rate Flow limitations. The others we don't need at this stage. Giving a quick glance without all the info, your minimum pressure of 4 is the standard default, but too low to be of any use. We will have to up this a bit, maybe increase a small token about, say just 6, until we get a clearer picture from the standard 5 graphs, and do it properly. You have some leaking, this can be dealt with also. RE: New user, support needed please - Expat31 - 09-04-2024 Oh, forgot, disactivate the calendar that will give more space so as to see all graphs clearly. (Click on small triangle to the left of date) RE: New user, support needed please - dvschwab - 09-04-2024 I'm also new here. I'm really glad there is a forum like this for us CPAP users. You said that you restart your machine because the pressure is too high. Do you have a ramp setting (i.e. a setting that starts out at a lower pressure)? I used to do the same thing, and my ramp setting was 30 minutes, so I effectively wasn't getting the full pressure for most of the night. I set the ramp to 5 minutes, and I am now sleeping all the way through the night (although I did my own post about why I'm still feeling so sleepy). Hope this helps. RE: New user, support needed please - Big Guy - 09-04-2024 Her machine will indeed, have a ramp setting. I use the same machine and I have the ramp setting set @ 5 minutes. Click on "My Options". The ramp setting is at the top of the list. RE: New user, support needed please - Deborah K. - 09-04-2024 I see some things that should help you. Your starting pressure is way too low. I suggest that you set your pressure range at 7-13. If you are using ramp, turn it off if you can handle it. If you feel you can't handle it, turn it up to 5 and use it for a short number of nights, with the plan to eventually turn it off. Change your EPR to full-time, set at 3. Good luck! RE: New user, support needed please - Katie.williams - 09-05-2024 hello and thank you for taking the time to reply. i think i have uploaded it with he correct info displaying now thank you for the advice. it does seem a bit hard to understand it all but any advice is appreciated. i will give this a try. RE: New user, support needed please - Old Steve - 09-05-2024 I agree with Deborah K. turn your min pressure to 7cm, your max to 13cm, EPR at 3 and limit your ramp time. |