Apnea Board Forum - CPAP | Sleep Apnea
02ring (Wellue) issue - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: 02ring (Wellue) issue (/Thread-02ring-Wellue-issue)



02ring (Wellue) issue - Blubarb - 10-05-2024

Hi all. I have just started using the Wellue 02ring and I find that after wearing it through the night my skin, where it has made contact throughout the night, is red and itchy the whole of the following day. Is this a known issue for some and if so, is there anything I can do other than stop wearing it? I have never been sensitive to anything that would irritate my skin like this does.


RE: 02ring (Wellue) issue - eok361 - 10-05-2024

https://www.apneaboard.com/forums/Thread-Equipment-O2-ring-itchy-skin


RE: 02ring (Wellue) issue - Blubarb - 10-05-2024

(10-05-2024, 08:40 AM)eok361 Wrote: https://www.apneaboard.com/forums/Thread-Equipment-O2-ring-itchy-skin

Thanks


RE: 02ring (Wellue) issue - eok361 - 10-05-2024

good luck getting it resolved.


RE: 02ring (Wellue) issue - Crimson Nape - 10-05-2024

Because of the sporadic reporting of this issue, I am wondering if these particular devices weren't properly cleaned at the factory. Electronics manufacturing uses some wild chemicals. This was brought home several years ago when I was in a plant that had cyanide respirators every 8 feet. I think I'd try a thorough wiping of the ring with alcohol to see if that helps.

Good luck!
- Red


RE: 02ring (Wellue) issue - Blubarb - 10-05-2024

(10-05-2024, 09:52 AM)Crimson Nape Wrote: Because of the sporadic reporting of this issue, I am wondering if these particular devices weren't properly cleaned at the factory.   Electronics manufacturing uses some wild chemicals.  This was brought home several years ago when I was in a plant that had cyanide respirators every 8 feet.   I think I'd try a thorough wiping of the ring with alcohol to see if that helps.

Good luck!
- Red

That does not sound too good at all!! I've just finished giving it a good, thorough clean with isopropyl. I'll let you know how it turns out.