+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Resmed airsense 11 water tank (/Thread-Resmed-airsense-11-water-tank)
Resmed airsense 11 water tank - super7pilot - 10-18-2024
Seems the biggest ding against the 11 is the fiddly water tank. I seem to have found a work around. (I didn’t see anything in the forum) as i was cleaning the tank today. I casually closed the lid and ran water from the sink into the air port (without the seal) and set the tank on the counter.
And what i then saw was a eureka moment. The water was extremely close to the full mark.
So, no worrying about spilling while trying to close the lid. Just pour and go. No mess at all.
RE: Adjust Airsense for EST time - Yılmaz EBEM - 10-18-2024
You are absolutely right, that is how I fill it. I do not open the cap, I just take it out and fill it from the air outlet. But even this drives me crazy. I will find a solution to this soon. I will make a small revision to the water tank so that it can be filled without removing it.
RE: Resmed airsense 11 water tank - Tampa Jim - 10-18-2024
We invert 90 degrees and fill. Very easy and effective.
RE: Resmed airsense 11 water tank - Crimson Nape - 10-18-2024
Yılmaz EBEM - You had made your post in the wrong thread and I have moved it to the correct one.
- Red
RE: Resmed airsense 11 water tank - super7pilot - 10-18-2024
I see I was late to the game with that tip.
Sorry for posting in the wrong area as well. The board wouldn't let me post in the review section as I'm too new.