+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: New to CPAP, changed min pressure to 7, need suggestions? (/Thread-New-to-CPAP-changed-min-pressure-to-7-need-suggestions)
New to CPAP, changed min pressure to 7, need suggestions? - namastelondon235 - 10-19-2024
Started cap on 27th sept with default settings, min =4, max = 16
On reading some threads changed min=7, max=20 and epr=3
Posting both charts and looking for suggestions.
Default Settings
[img]blob:https://www.apneaboard.com/b3847058-f3c4-48c7-bdad-9b73c6d2c1a9[/img]
Post Changes
[img]blob:https://www.apneaboard.com/37f8d297-fc6c-4364-83cd-1012d7d5510b[/img]
RE: New to CPAP, changed min pressure to 7, need suggestions? - G. Szabo - 10-19-2024
Your links are dead.
You should attach your screenshots using the tool at the bottom of your message page, "ATTACHMENTS." Choose the desired file, then click on the "add attachment" knob.
RE: New to CPAP, changed min pressure to 7, need suggestions? - namastelondon235 - 10-19-2024
Updated with right attachments
RE: New to CPAP, changed min pressure to 7, need suggestions? - G. Szabo - 10-19-2024
I suggest setting the minimum pressure to 9 cm and EPR=3 and turning the ramp off.
Your instrument setting is not visible on the bottom of the left-hand side. Try reducing the character size.
RE: New to CPAP, changed min pressure to 7, need suggestions? - staceyburke - 10-19-2024
It would help if you can show the Flow Limits.. From your chart I assume they are high and EPR set to 3 as was suggested would help.
RE: New to CPAP, changed min pressure to 7, need suggestions? - Deborah K. - 10-19-2024
It would help if you make some changes to your Oscar charts. On the first page we need to see only the following items, in the order listed:
Event Flags
Flow Rate
Pressure
Leak Rate
Flow Limits
We need to be able to read to the very bottom of the Flow Limits.