Apnea Board Forum - CPAP | Sleep Apnea
CPAPC SHOWS SD CARD LOCKED - IT ISN'T - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: CPAPC SHOWS SD CARD LOCKED - IT ISN'T (/Thread-CPAPC-SHOWS-SD-CARD-LOCKED-IT-ISN-T)



CPAPC SHOWS SD CARD LOCKED - IT ISN'T - RV Winkle - 11-02-2024

Respitonics Remstar Auto A-Flex
This is an older machine, probably 2012 
There hasnt been an SD card in it 
I went today to insert a card and the screen says 'SD Card Locked'
I have tried different cards and they all have the switch up to the write position  
These are SDHC cards. Some have said they will not work on older machines I need just SD cards, others say they do.
Any helpful ideas please? 
The manual does not address  SD card locked under trouble shooting


RE: CPAPC SHOWS SD CARD LOCKED - IT ISN'T - Crimson Nape - 11-02-2024

Hi RV Winkle! - Welcome
What size card are you trying to use? In 2012, a 2GB card was considered large. Also, 2012 was the year that the SDHC and SDXC cards were released. I doubt Respironics had time to update their product line with the new card reader. If you are wondering (even if you're not) the SDHC and SDXC specification added extra pins, which may cause a problem in your machine
- Red


RE: CPAPC SHOWS SD CARD LOCKED - IT ISN'T - eok361 - 11-02-2024

it sounds like the sdhc isn't compatible with that machine. try an older one, and i wouldn't go bigger than 4 gb.


RE: CPAPC SHOWS SD CARD LOCKED - IT ISN'T - RV Winkle - 11-02-2024

I put in a 4GB SDHC card

Could not find a standard SD card anywhere locally so ordered one on Amazon will try it when it arrives.

Thanks all 

 


RE: CPAPC SHOWS SD CARD LOCKED - IT ISN'T - RV Winkle - 11-02-2024

uh oh  _ i also am getting  an error 13 code on Compliance 
E-13
ERR_SVC_STACK_UNDERFLOW
Defective RAM chip Replace Main PCA


I need this compliance report for my job in order to work 

If I cant get it off this machine I;ll be spending $900 on a new one Sad


RE: CPAPC SHOWS SD CARD LOCKED - IT ISN'T - eok361 - 11-02-2024

oh, darn. i just happened to find an old phillips data card that worked in a similar machine. pm if the one you bought doesn't work, and i will send it to you.


RE: CPAPC SHOWS SD CARD LOCKED - IT ISN'T - RV Winkle - 11-02-2024

Thank You!


RE: CPAPC SHOWS SD CARD LOCKED - IT ISN'T - RV Winkle - 11-04-2024

UPDATE = With an older 2GB SD card I was able to get some files downoaded.
One is a core.log file which is 169B  and looks like the file I need
But I cannot figure out how to open it 

Maybr Im getting closer but I dont know


RE: CPAPC SHOWS SD CARD LOCKED - IT ISN'T - Crimson Nape - 11-04-2024

Try a text editor first. If the text looks like hieroglyphics, then you will need to open it with a hex editor.
- Red


RE: CPAPC SHOWS SD CARD LOCKED - IT ISN'T - RV Winkle - 11-04-2024

(11-04-2024, 07:54 AM)Crimson Nape Wrote: Try a text editor first.  If the text looks like hieroglyphics, then you will need to open it with a hex editor.
- Red

Hex editor? 

Late breaking news.  I downloaded and installed Oscar and after alot of fiddling  I was able to import from the SD card and see create a report which I hope the employer will be satisfied 30 days from now.  Thanks help all