1 year and something is still wrong (please advise) - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: 1 year and something is still wrong (please advise) (/Thread-1-year-and-something-is-still-wrong-please-advise) |
1 year and something is still wrong (please advise) - cpapadventure - 12-16-2024 Hello, Been using Airsense 11 for a year now, had 32 AHI during sleep study. Now at 3-4 but still feeling incredibly tired and the doctor has no clue... I've posted my last 3 nights, not sure what I should be looking for, but I would greatly appreciate it if someone could help me. Thank you so much RE: 1 year and something is still wrong (please advise) - super7pilot - 12-16-2024 Seems with your pressure settings you are nearly in CPAP mode. Your min is 12 yet you spend 95% of your time at 13. Have you tried EPR at all? Now, I'm new to this. So don't take my word as gospel. RE: 1 year and something is still wrong (please advise) - cpapadventure - 12-16-2024 Yes I started with EPR on but I think it made me stop breathing more. If I remember correctly I had more centrals with it on. 95% of pressure is 13, meaning I should put the minimum pressure at 13 correct ? RE: 1 year and something is still wrong (please advise) - jdougc - 12-16-2024 95% of pressure is 13, meaning 95% of the time you are below this pressure. Don't make the minimum that pressure, too much of a change. But increase it a bit. Can you show the machine settings, might be helpful to the experienced people here. You have consistent leaks, not large, but they might effect your therapy. Also do you use a soft cervical collar, do you sleep on your side? Did you have CAs on your sleep study? What mask do you use, still the Evora full face mask? RE: 1 year and something is still wrong (please advise) - Deborah K. - 12-16-2024 It would help if you set your minimum pressure at 12 or 12.4, as that is your median pressure. |