Apnea Board Forum - CPAP | Sleep Apnea
Pressure reset for ResMed Escape II - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Pressure reset for ResMed Escape II (/Thread-Pressure-reset-for-ResMed-Escape-II)



Pressure reset for ResMed Escape II - dbenfield86 - 06-06-2014

[attachment=846]I can't find instructions for the ResMed Escape II CPAP. Can someone please point me to the right place? I'm attaching a picture of the machine.


RE: Pressure reset for ResMed Escape II - zonk - 06-06-2014

(06-06-2014, 02:48 PM)dbenfield86 Wrote: I can't find instructions for the ResMed Escape II CPAP. Can someone please point me to the right place? I'm attaching a picture of the machine.
If not mistaken, it looks like an S8 to me, You can ask for the clinical manual via Email, scroll down to section three (ResMed S8 Escape)
http://www.apneaboard.com/adjust-cpap-pressure/change-cpap-pressure-settings-adjusting-your-machine-with-a-clinician-setup-manual
Press the right and down arrows simultaneously for about 3 seconds until the word "clinical" appears. Select Menu, then use the left and right arrows to cycle through the settings. Use the up and down arrows to make adjustments.

S8 setup video from CPAP library: http://vimeo.com/19565675



RE: Pressure reset for ResMed Escape II - trish6hundred - 06-06-2014

Hi dbenfield86,
WELCOME! to the forum.!
Hang in there for more responses to your post and best of luck to you.


RE: Pressure reset for ResMed Escape II - dbenfield86 - 06-06-2014

Thank you. As it turns out I found a pdf document elsewhere online that explains how to get into the settings of my ResMed S8. I tried it and I think it worked, we'll see. I have the opposite problem of most folks, it seems. The pressure is too high and it starts pushing air out between my skin and the mask and it wakes me up and keeps my light-sleeping wife awake. I need to lower the ramp max pressure. I find that I don't need a lot of pressure for my apnea, I guess it's not so severe.


RE: Pressure reset for ResMed Escape II - zonk - 06-06-2014

(06-06-2014, 07:25 PM)dbenfield86 Wrote: I find that I don't need a lot of pressure for my apnea, I guess it's not so severe.
We don,t know for sure
S8 Escape does not display/report any useful data such as AHI or leak data, just how many hours using the machine each night