+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Changing the date on F&P Icon Auto? (/Thread-Changing-the-date-on-F-P-Icon-Auto)
Pages:
1
2
Changing the date on F&P Icon Auto? - dp43 - 07-31-2014
Hello Everyone!
I'm a newbe, I have been using my cpap close to a week now.
Took to it rate away, Like a fish in water.
I have a Fisher & Paykel Icon Auto
With heated tube and Humidifier, Nice.
I have one item (setup) that I'm would like to figure out with some help.
My Sleep data is being saved to the USB stick,
However, It's still time stamping with the old date information 12.01.2007
I have looked at the setup menu and can't seem to find where to change the date ?
Can anyone help with this information ?
I'm thinking that it must be there, And I may be brain dead ? Can't see it!
Also, Thanks for your help in regards to downloading:
The Setup Manual.
And The Sleepy Head Software.
Great Board!
Thanks,
Dick
[/size][/font]
RE: New User Questions - trish6hundred - 08-01-2014
(07-31-2014, 05:39 PM)dp43 Wrote: Hello Everyone!Hi dp43,
I'm a newbe, I have been using my cpap close to a week now.
Took to it rate away, Like a fish in water.
I have a Fisher & Paykel Icon Auto
With heated tube and Humidifier, Nice.
I have one item (setup) that I'm would like to figure out with some help.
My Sleep data is being saved to the USB stick,
However, It's still time stamping with the old date information 12.01.2007
I have looked at the setup menu and can't seem to find where to change the date ?
Can anyone help with this information ?
I'm thinking that it must be there, And I may be brain dead ? Can't see it!
Also, Thanks for your help in regards to downloading:
The Setup Manual.
And The Sleepy Head Software.
Great Board!
Thanks,
Dick
[/size][/font]
WELCOME! to the forum.!
I'm glad to hear that you took well to CPAP therapy. I don't know the answer to your question regarding the data information but hang in there and someone will be along to help you, soon.
Best of luck to you and keep up the good work.
RE: Changing the date on F&P Icon Auto? - SuperSleeper - 08-02-2014
Dick, this page shows how to change the time on your machine... it may also be similar procedure for changing the date:
http://www.apneaboard.com/wiki/index.php?title=Setting_the_clock#F.26P_Icon
Perhaps someone else who has one of the Icons can tell us for sure.
Changing the date on F&P Icon Auto? - dp43 - 08-02-2014
I'll say it again, Great Board!
The time setting has never been a problem, But I don't seem to have that date menu,
And it doesn't continue after the time is set ?
No problem, I'm working around that, The date is no problem, I just change the dates on the files.
Being a newbe, And a quick learner I have a few wrinkles to work out, And I will.
Speaking of wrinkles, I have a couple more, And the second wrinkle being the most important.
Fisher & Paykel ICON AUTO
Does anyone have any information about the error codes ?
Like: 5.00 , 5.02 , 5.03 , 5.07
I think I figured the 5.00 , Blower / Fan Failure!
And now for my most important thing I need to do rate away!
I'm looking to buy a replacement Blower (Fan) ASAP if anyone has information on where to purchase ?
At 7:30am this morning my F&P Icon Auto QUIT !
Actually the Blower quit and I believe left me with a 5.00 error.
I've only be using this machine for about 4 days, And now I want to keep using it!
I purchased this machine as used but never used, It had been setting around for a few years
I'm sure it picked up some moisture and whatever.
I figured I have nothing to loose, So I'll take it apart and look it over. And I did!
Yup, The blower or Fan was not working, The bearing sounded a little dry.
I managed to get a little lube down the shaft, Noticed a little rust, So I guess moisture got it!
Anyway, It's back up and running for who knows how long.
Tonight and a few more nights would be great.
So if anyone can help, I need to purchase a new or used blower.
Thank you SuperSleeper for the move and the push!
Thanks All,
dick
RE: Changing the date on F&P Icon Auto? - zonk - 08-02-2014
(08-02-2014, 06:47 PM)dp43 Wrote: Does anyone have any information about the error codes ?Hi dp43
Like: 5.00 , 5.02 , 5.03 , 5.07
I think I figured the 5.00 , Blower / Fan Failure!
From Icon technical manual http://www.apneaboard.com/file_links121/servicemanuals/ICON_Technical-Manual.pdf
Error codes
Fault NO: 5.0-5.8
DESCRIPTION: Motor Faults
INDICATION: Error symbol
ACTION: Disconnect from power, then connect and re-start device. If error persists, return device
Supplier #2 is good source of new and used machines
http://www.apneaboard.com/forums/Thread-CPAP-Supplier-List
RE: Changing the date on F&P Icon Auto? - dp43 - 08-02-2014
Thanks for the information with the Icon technical manual, Great.
I have checked out the source list, Will check again later.
thanks again,
dick
RE: Changing the date on F&P Icon Auto? - dp43 - 08-04-2014
Yes, Supplier #2 is a good source!
Just did a little business with them.
Still looking high and low for a blower motor for my F&P icon auto.
Been surfing for days!
No luck yet!
thanks,
dick
Changing the date on F&P Icon Auto? - dp43 - 08-07-2014
While still looking around for a Motor for my F&P Icon Auto I have purchased a new Cpap.
My new best friend is the:
DeVilbiss IntelliPAP™ Auto
I might setup it up tonight ? Doing some reading!
And yes, I have questions, What fun would we have without questions, And hopefully answers ?
Is there any way to read the DeVilbiss IntelliPAP data with just a cable,
Or is the SmartLink Module and Data Card a must.
It would be nice if SleepyHead could read this direct.
That might be wishful thinking.
Just saying!
thanks,
dick
RE: Changing the date on F&P Icon Auto? - dp43 - 12-01-2014
Good Evening,
If anyone has any new information,
I'm still looking for a replacement Motor for my:
Fisher & Paykel Icon Auto
thanks.
RE: Changing the date on F&P Icon Auto? - BreathlessTom - 12-02-2014
you will not typically find parts for medical devices on the open market as only qualified and approved (by the mfgr) repair centers will have them. Some mfgrs will only do in house repairs.
If it is a bad bearing and it is a removeable type, it may be able to be sourced if you can measure it acurritly.
Tom