[Equipment] system error - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: [Equipment] system error (/Thread-Equipment-system-error) |
system error - tfitzge1 - 08-17-2014 Can I fix the "system error" on my RESMED cpap machine. It will not turn on. RE: system error - surferdude2 - 08-17-2014 Pull the SD card out and leave it out when booting the machine up. If things go well and the machine starts up without a peep, get a new SD card and try it. If not, you may have to take it in for service. If taking it in isn't handy or if you're paying for it out of pocket, there are some things to try before capitulating. You can try unplugging the machine and waiting 30 seconds +- and powering it up again. While it's powered down, hold all the buttons down just in case that may help. If that doesn't work, you can reset the machine to default condition by entering clinical mode and opting for that from the menu offered. If none of that worked, you're out of luck pal and will need to take to a technician for troubleshooting and repair or else use it for a door stop. RE: system error - trish6hundred - 08-17-2014 Hi tfitzge1, WELCOME! to the forum.! Which Resmed machine do you have? The name is next to the power button. Hang in there and someone will be along to help you, soon. Best of luck to you. RE: system error - zonk - 08-17-2014 (08-17-2014, 04:33 PM)tfitzge1 Wrote: Can I fix the "system error" on my RESMED cpap machine. It will not turn on.If the machine is an S8, according to the manual ... component failure ..... record error number and contact the ResMed service center Check Supplier #2 for used and new machines Suppliers List http://www.apneaboard.com/forums/Thread-CPAP-Supplier-List Archangle:Machine Choices http://www.apneaboard.com/wiki/index.php?title=Archangle:Machine_Choices |