Help! New Resmeds Puffing Air - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: Help! New Resmeds Puffing Air (/Thread-Help-New-Resmeds-Puffing-Air) Pages:
1
2
|
Help! New Resmeds Puffing Air - Clearskiesaustin - 02-26-2015 I have used an Escape II cpap at pressure 6 for 5 years. It is time for a new machine, so I got the fancy Airsense 10 for Her. I hated it because as I would start to fall asleep and breathe more slowly, it would start these little puffs of air at me that woke me up. It even did that when I was fully awake. I tried on an S9 Elite, and it did that, too. Why did they ruin my nice resmed from 5 years ago? Does anyone know about the S9 Escape or Escape Auto? What about the autoset? I hate to waste money and sleep on bad machines. I emailed Resmed, and they said they said to ask my DME provider. I asked two DME providors who had no idea. Also, the heated hose still got water up my nose and was on the lowest setting. I am in humid Texas, but I thought a lowest setting would help with dry mouth. RE: Help! New Resmeds Puffing Air - Sleeprider - 02-26-2015 Clearskiesaustin, you can set the Airsense 10 autoset for her to CPAP mode. You are accustomed to single pressure, and it will work fine on that machine. You can get the clinical manual here, http://www.apneaboard.com/adjust-cpap-pressure/change-cpap-pressure-settings-adjusting-your-machine-with-a-clinician-setup-manual and the way to get into the setting menu is: Quote:he "dial" can be turned or pushed. The button below the screen with the house icon is called the "home" button. To access the clinician menu, press the dial and the home buttons simultaneously for 3 seconds. The clinician menu will appear. Select parameter(s) you wish to modify with the dial (push down to select, turn to modify). When done, press the dial and home buttons for 3 seconds again, or find the "exit clinical menu" option in the menus. (complete manual available via email, below) RE: Help! New Resmeds Puffing Air - Clearskiesaustin - 02-26-2015 Yes, we set it to pressure 6 and turned off every feature possible but it still puffed air at me. I returned it and am back to my 5 year old Escape II. RE: Help! New Resmeds Puffing Air - Sleeprider - 02-26-2015 The new version CPAP with data is the Autosense 10 Elite. There is also a CPAP and Escape, that cost slightly less, but they don't produce data. Yours is the first complaint I've heard on the Autoset for Her, which is considered by many to be the nicest auto CPAP on the market. RE: Help! New Resmeds Puffing Air - trish6hundred - 02-26-2015 Hi Clearskiesaustin, WELCOME! to the forum.! It may be that you need to keep trying the new machine so you can get used to it. If you can do that, you would be better served by the newer technology in the AirSense 10 AutoSet For Her. Hang in there for more responses to your post and much success to you as you continue your CPAP therapy. RE: Help! New Resmeds Puffing Air - Clearskiesaustin - 02-26-2015 I tried the Airsense for the maximum weeks they would let me keep it before I had to decide to return it. Another forum said that it sends out puffs of air after you stop breathing for 4 seconds to determine if your airway is open, but they said the Philips brand waits 10 seconds. I counted my speed of breathing awake, and I sometimes wait 4 seconds to breathe awake. However, my daytime oxygen tests at 98, so it should not be a problem. This machine does not like the way I breathe. However, I got a simple z1 travel cpap, and love it. I had no trouble adjusting to it when traveling, so that tells me that the Airsense is not a good match for me and it is not a matter of practice. I just need a simple machine for daily use at home. I am wondering if the s9 Escape has tha horrible air puffing, or if it is like my old Escape II. I just am trying to find a simple machine that works for me. The Airsense was horrible. RE: Help! New Resmeds Puffing Air - player - 02-26-2015 I know the puffing, but it is, for me, not very noticeable. It helps with central apneas'. RE: Help! New Resmeds Puffing Air - archangle - 02-26-2015 You're probably feeling the "Forced Oscillation Technique" (FOT) pulses the ResMed machines use to try and distinguish central apneas from obstructive. There appears to be no way to turn this off. It is not related to Auto, CPAP mode, EPR, or anything else you can adjust. I suspect the S9 Escape machines wouldn't do this, but I'm not 100% sure. All of the Airsense 10 machines detect apnea, so I presume they do FOT. Philips Respironics PRS1 uses "pressure pulses," which don't flutter. The PRS1 pressure pulse is a higher pressure change than FOT, but it only turns on and off once. I'm guessing the PRS1 Plus, SE, and DS160 won't do this, since they don't detect apnea, but I'm not 100% sure. RE: Help! New Resmeds Puffing Air - OMyMyOHellYes - 02-26-2015 Yeah - my S9 did that. When I wake up early in the morning, I sometimes pause between breaths, not because of some apneic event, I just breathe that way sometimes. The S9 Auto would start a little staccato bop-bop-bop-bop-bop rythmic pressure bumps that I found disturbing. I have switched to the Respironics 560 as of a few days ago and I haven't noticed the same phenomenon - I think the S-9 is thinking I (or you) are having some kind of apnea and is using little jack hammer pressure bumps to knoc the airway open. I would suggest for you that you find out how to take the Airsense 10 out of auto mode and run it in CPAP mode for a few nights, at your 95% pressure, and see if that works better for you. BTW - I jsut read what Archangle wrote right above, so this may not work. Did you send the Airsnese 10 back? If so, and you still need a new machine, you may consider looking at another line like the Respironics - or I even like the DeVillbiss Intellipap Auto - but it lacks some of the ease of reporting that the Resmed and Respironis feature unless you be a snap on module. OMM RE: Help! New Resmeds Puffing Air - Clearskiesaustin - 03-02-2015 Thanks, everyone! |