Difference between revisions of "OSCAR Troubleshooting"

Revision as of 20:03, 9 May 2020

This article is part of the official OSCAR software project. (OSCAR Help)

OSCAR Help

This guide is part of the suite of OSCAR help articles. See OSCAR Help.

Installing OSCAR

Data won't load correctly (or at all)

OSCAR starts but crashes

If I open the profile then the program crashes

Description: After creating a profile, OSACAR crashes when the user first attempts to open that profile.
Possible fault mechanism: OSCAR has three different graphics engines available -- OpenGL, ANGLE, and Software engine. OpenGL is the default but does not work with some older computers. The problem may be overcome by using an alternative graphic engine.
Solution or workaround: Use the solution below for your version of OSCAR.

[OSCAR 1.1.0]
Press and hold the SHIFT key when you start OSCAR. 
OSCAR will use the Software engine.
Later, if you want to try the ANGLE engine, go to File/Preferences/General and select the ANGLE engine.

[Any version of OSCAR] 
Disclaimer: Editing the Windows registry can cause damage to your computer including the possibility that it will no longer work. Undertake this procedure at your own risk.
1. Download FixGraphics.reg, open Windows Explorer, navigate to where you saved the file, and double click on FixGraphcs.reg to update the registry.  
2. You will get a variety of warning messages from Microsoft about the danger of editing the registry.  Go ahead and allow the registry changes to be made.  
3. Restart OSCAR and see if that helps.

The registry script forces use of the Software engine.  Later, if you want to try the ANGLE engine, go to File/Preferences/Appearance and select the ANGLE engine.  If it doesn't work after you do that, just run the registry script again and you'll be back to the software engine.

OSCAR graphics problems

Description: Print size is extremely small or unreadable.
Possible fault mechanism: This can occur with ultra-high definition screens.
Solution or workaround: In Windows:

1. In the Windows file explorer, go to whatever folder contains the oscar.exe program (usually C:\program files\oscar or c:\program files (x86)\oscar)
2. Right click on 'oscar.exe'.
3. Left click on 'Properties'.
4. Left click the 'Compatibility tab'.
5. Left click box for 'Overide high DPI scaling behavior'.
6. Scaling performed by: Click on drop down box just below and select 'System'.
7. Click Apply, then OK.

OSCAR doesn't show the entire day

Description: OSCAR shows nap in afternoon but not the night's sleep.
Possible fault mechanism: OSCAR only allows one import of data per a 24-hour day.
Solution or workaround: Purge and re-import the day

OSCAR only allows one import of data per a 24-hour day. For a Resmed, a day is from noon to noon. If you import a nap session from the afternoon, then you won't be able to see any further data for that day without purging the day's data then re-importing it again. To purge a day's data; Go to the day you wish to purge in the Daily Screen, then select Data ⇾ Advanced ⇾ Purge Current Selected Day from the menus at the top. Now, you can import back in the data for that day and it should all be there.

Your SD card should always remain inserted in your CPAP machine and only removed to read its data. The machines required that an SD card be present to record the detailed sleep data. If you forget to have it inserted during a sleep session, then only summary information will be available. A 1Gb card is fine, just don't use any card above 32Gb in size.

Donate to Apnea Board