Viatom File Import
|
|
Afrikaans /
في الصفحة /
български /
中国 /
臺灣 /
čeština/
Dansk /
Deutsch /
Ελληνικά /
Español /
Filipino /
Français /
עברית /
Magyar /
Italiano /
日本語 /
한국어 /
Nederlands /
Norsk /
Polskie /
Português /
Română /
Pусский /
Suomalainen /
Svenska /
ภาษาไทย /
Türkçe |
Contents
Supported Pulse Oximeters
OSCAR 1.1.0 supports the Wellue (Viatom) pulse oximeters listed below. Viatom devices are distributed in the US by Wellue, and may have different names than their international equivalents.
- Wellue SleepU
- Wellue O2Ring
- Possibly others, such as the KidsO2 and Checkme O2, but they are currently untested.
Download Recorded Sessions from the Pulse Oximeter
Windows PC
- Download and install Viatom's free O2 Insight Pro software. [link]
- Connect your oximeter to your PC with the USB cable that came with your oximeter. The O2 Insight Pro window should say "Device connected" in the bottom right corner. Viatom's software cannot connect via Bluetooth. You must use the proprietary USB cable that came with your oximeter.
- Click Download.
The downloaded session files will be stored in C:\Users\YourUserNameHere\AppData\Local\O2 Insight Pro\DATA\SerlalNumber.
Android App
- Download and install Viatom's free ViHealth Android app. [link]
- Launch the app while your oximeter is turned on. The app will automatically detect it and download your data. If your oximeter is off, you can simply replug in the USB charging cable (or ring sensor, if applicable) to turn it on.
The downloaded session files will be stored in /sdcard/PlusebitO2CN. Ideally copy these files into a folder on your computer and use your oximeter's serial number as the folder name.
iOS App
- Download and install Viatom's free ViHealth iOS app. [link]
- Launch the app while your oximeter is turned on. The app will automatically detect it and download your data. If your oximeter is off, you can simply replug in the USB charging cable (or ring sensor, if applicable) to turn it on.
- TODO
macOS
There is not currently any Viatom application that runs on macOS. For now you can run the PC application in a Windows VM or use one of the mobile apps above.
Import the Downloaded Sessions into OSCAR
- Select Data > Import Viatom Data in OSCAR's menu bar.
- Navigate to the folder where your downloaded session files are stored. See above for the location, depending on how you downloaded the data from the device. The session files are named after the time at which each night's recording started, e.g. 20200408214533 for April 8, 2020 at 9:45:33 pm.
- Select the folder containing the session files and click Open. All sessions in that folder will be imported, and previously imported sessions will be skipped.
Alternatively, if you want to import only a single session, you can select just that session file.
Donate to Apnea Board
