Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Aircurve10 VAuto Settings
#1
Aircurve10 VAuto Settings
I haven’t been able to use my machine for the past 2 1/2 months. I have nutcracker esophagus and swallowing air was really irritating my condition. I got Botox in my esophagus which has helped tremendously. I’m absolutely exhausted and need to start my bipap again. I’ve talked to my doc office but they aren’t very helpful. My old setting are just too much air for me. I think I was 11 and 5. I don’t remember the ps because I tried to adjust it. I want my settings to be the lowest so I’m not swallowing air. I’d rather start low and then build up from there. So I need to know what my ipap, epap, and ps should be set at? Please help!! ?
Post Reply Post Reply
#2
RE: Aircurve10 VAuto Settings
It will help if you download and install OSCAR on a laptop or computer. We are going to want to know the results and any issues with what we are going to do. Based on your description of the problem, I'm going to suggest we start with very low settings and see where the comfort threshold is. We may compromise optimal AHI in order not to exceed your esophageal threshold.

Recommended Settings:
Mode: Vauto
EPAP min 4.0
PS: 3.0
Max IPAP Pressure 9.0

We will attempt this one night and hopefully get a report from you on whether you remained comfortable and get some idea of what events may have occurred. This provides a range from 7//4 to 9/6 (IPAP/epap). Good luck!
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#3
RE: Aircurve10 VAuto Settings
Great! I’ll try these settings for a couple nights and look at Oscar! Thanks so much!
Post Reply Post Reply
#4
RE: Aircurve10 VAuto Settings
Hopefully I uploaded these correctly!  My mask fit is pretty snug so I'm not sure about the leaking. Smile


               
Post Reply Post Reply
#5
RE: Aircurve10 VAuto Settings
These low settings did not result in obstructive events and I was surprised to see the CA. That could be sleep disturbances. My big question is how was the aerophagia?
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#6
RE: Aircurve10 VAuto Settings
These settings definitely felt better.  I don’t think I was swallowing as much air. Is CA clear airway? What does that even mean??
Post Reply Post Reply
#7
RE: Aircurve10 VAuto Settings
CA is a pause in breathing for at least 10 seconds where the airway is not obstructed. It can occur for many benign reasons. Let’s continue with these settings and as you get more comfortable, I expect these events to diminish. If necessary we will take a closer look to see if there is anything we can or should do to reduce them.

You have a shallow breathing pattern of only 280 mL per breath. Are there any health conditions we should be aware of that required higher pressure support? It. Would be interesting to compare a chart from before we made the changes. Regardless I want to continue with the more comfortable settings for now.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#8
RE: Aircurve10 VAuto Settings
Thank you for all this help. I truly appreciate it! I did have pretty bad asthma as a kid and grew out of it. I have rheumatoid arthritis, possibly another connective tissue disease that hasn’t been figured out yet. I have nutcracker esophagus and have to have Botox injected into my esophagus 2 months ago. I’m 45 years old, I’m 5’2” and weigh 115. Apnea was quite a surprise diagnosis for me! I’ll continue with these settings and I’ll see about getting some older Oscar Info when I return home. I’m away for a couple nights. Thanks again!?
Post Reply Post Reply
#9
RE: Aircurve10 VAuto Settings
           


This was last night.  I'll try to find an older one too! Smile


Attached Files Thumbnail(s)
       
Post Reply Post Reply
#10
RE: Aircurve10 VAuto Settings
Can you also tell me what TI max and min and trigger point should be set at?
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  acquired an aircurve vauto 10/self titrating eok361 21 980 10-24-2024, 07:39 AM
Last Post: eok361
  How should I set up my AirCurve 10 Vauto Josephkpc 15 949 10-19-2024, 08:18 AM
Last Post: Josephkpc
  Resmed Aircurve 11 VAuto I:E LaserBoi 7 439 10-16-2024, 08:03 AM
Last Post: Sleeprider
  Self titration Aircurve 10 VAUTO HELP georgesadam 18 919 10-15-2024, 01:06 PM
Last Post: georgesadam
  Difference between S-Mode and VAUTO mode - Aircurve MrIvanDrago 12 1,386 10-11-2024, 08:33 AM
Last Post: MrIvanDrago
  Resmed Aircurve 10 VAUTO turning itself off and on throughout the night?? 17WRX 4 225 09-29-2024, 06:41 PM
Last Post: 17WRX
  Seeking Advice on BiPAP AirCurve 10 VAuto Settings for Upper Airway Resistance Syndro chacha897d 1 347 09-07-2024, 08:13 PM
Last Post: CPAPfriend


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.