I was able to get my hands on an aircurve 10 and was wondering where to start with settings on this in relation to the settings on the airsense 11.
Any input is appreciated, thanks!
Hello Guest,
Welcome to Apnea Board !
Airsense 11 to Aircurve 10 vauto
|
07-28-2024, 10:16 AM
Airsense 11 to Aircurve 10 vauto
I’ve got my airsense 11 dialed in decently with low AHI, currently at 7-13 with EPR at 2 but still struggling with fatigue in the daytime.
I was able to get my hands on an aircurve 10 and was wondering where to start with settings on this in relation to the settings on the airsense 11. Any input is appreciated, thanks!
07-28-2024, 10:30 AM
RE: Airsense 11 to Aircurve 10 vauto
For the APAP settings of
Mode APAP Min pressure 7 Max pressure 13 EPR 2 full-time The equivalent bilevel settings would be Mode VPAPauto EPAP min 5 IPAP max 13 PS 2 The difference is EPR is subtracted from IPAP, whilst PS is added to EPAP.
08-10-2024, 10:42 AM
RE: Airsense 11 to Aircurve 10 vauto
Just want to stop by and see if anyone has any input.
Overall, I am happy with how I am tolerating the bipap vs apap, I had a really hard time with apap. I am having some aerophagia and battling mouth breathing (cheeks filling up with air, jaw relaxing and air trying to come out of mouth), but using tape to rectify that. The pressures feel good at this time though. I am using a nasal mask at this time.
08-11-2024, 04:28 AM
RE: Airsense 11 to Aircurve 10 vauto
Well, that’s impressive! And you’re doing well with leaks.
08-11-2024, 12:04 PM
RE: Airsense 11 to Aircurve 10 vauto
Thanks! It's been a lot of finagling and playing with different masks, machines, pressure settings, etc. I am having some issues with aerophagia so I am looking for some insight on how to possibly rectify that.
08-11-2024, 12:49 PM
RE: Airsense 11 to Aircurve 10 vauto
I think it was recommended a few posts back to try these settings as they mirrored what you were using with the A11.
It may or may not help with Aerophagia, but worth a try. I would, however limit the maximum IPAP to 12. Mode VPAPauto EPAP min 5 IPAP max 13 PS 2
OpalRose
Apnea Board Administrator www.apneaboard.com _______________________ OSCAR Chart Organization How to Attach Images and Files. OSCAR - The Guide Soft Cervical Collar Optimizing therapy OSCAR supported machines Mask Primer INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
08-11-2024, 06:01 PM
RE: Airsense 11 to Aircurve 10 vauto
Your AHI is so low that I think you have plenty of room to experiment with lower max IPAP, as OpalRose suggests. If 12 doesn't help with the aerophagia, you can try 11; if that doesn't help, 10. Stop lowering the IPAP max if your AHI goes over, say 1.
I've heard other people say they have horrible aerophagia with one pressure and then none with a pressure just .2 or .4 lower. So you should definitely play around to find your sweet spot. As for daytime fatigue, an easy thing to try is to schedule yourself so you can get more actual sleep. Many people need a solid 8 hours. To 8 hours you should add the time it takes you to fall asleep plus the time you spend awake during the night to get the total time in bed that you may need.
08-12-2024, 09:41 PM
RE: Airsense 11 to Aircurve 10 vauto
I changed the EPR to 2 last night and also adjusted the Timax slightly lower as I felt like it was just a hair too much inhalation for me (the standard settings felt too short). I think the aerophagia has reduced, but will report back after a few nights.
The only thing is the jaw relaxing, tongue falling off the roof of my mouth and cheeks filling up with air. I use mouth tape but it tends to fall off due to saliva. I currently am undergoing MARPE which makes keeping my tongue on the roof of my mouth much harder. I may try a chin strap or some more resilient tape. I’ll report back in a few days. |
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
resmed as10, as11 aircurve 10 daylight savings time end | eok361 | 9 | 262 |
11-04-2024, 07:10 PM Last Post: pcsdpolsen |
|
Aircurve 10 ASV Periodic Pressure Surges cause leaks | scooterbill | 2 | 97 |
11-04-2024, 04:31 PM Last Post: SarcasticDave94 |
|
>> Attention: Resmed AirCurve 11 Users << | Crimson Nape | 0 | 98 |
11-04-2024, 02:24 PM Last Post: Crimson Nape |
|
Titrating a Redmed aircurve 10 Bipap ST model | macaronno336 | 3 | 156 |
11-01-2024, 06:10 PM Last Post: SarcasticDave94 |
|
acquired an aircurve vauto 10/self titrating | eok361 | 21 | 976 |
10-24-2024, 07:39 AM Last Post: eok361 |
|
How should I set up my AirCurve 10 Vauto | Josephkpc | 15 | 948 |
10-19-2024, 08:18 AM Last Post: Josephkpc |
|
[Equipment] Higher AHI Readings on AirSense 11 than AirSense 10 | Bmck8381 | 0 | 212 |
10-17-2024, 06:07 PM Last Post: Bmck8381 |