formatting SD card

[Larrypac]

Last night I used my Resmed Airsense 11 for 7.5 hours but there was nothing on the card.  I'm wondering if I should try a different card and if so, does it need to be formatted specially for Oscar?  Will use the APAP for a few minutes after noon and see if it records anything and if not, I will need to figure out why.  Thoughts?  LP

[Crimson Nape]

Did you have the "write protect" turned on?  On some SD cards it is listed  as "Lock". Make sure it's fully forward, like the photo below.

[Larrypac]

Last night I used my Resmed Airsense 11 for 7.5 hours but there was nothing on the card.  I'm wondering if I should try a different card and if so, does it need to be formatted specially for Oscar?  Will use the APAP for a few minutes after noon and see if it records anything and if not, I will need to figure out why.  Thoughts?  LP

I took the card out again and found the data  this time.  Also did another search and there is some info on the board about formatting data cards. (the machine does it automatically, though there is some discussion about using cards larger than 32 GB)

[Crimson Nape]

Another member, ScottZZZ, tested his AS11 up to 256GB (I think). The 32GB limitation is for Resmed models AS10 and earlier.

[ScottZZZ]

The main precaution I would give is don't use a card that has data from another machine present.  It won't cause a problem for the AS11 per se, but it may cause a problem for OSCAR or ResScan seeing files from multiple machines, and/or may overwrite (obliterate) data from the previous machine depending on make/model.

Start with an empty card, formatted or unformatted, and place it into the AS11.  The AS11 will format the card if/as needed and create the AS11's standard files/folders.  

Most machines can't handle cards larger than 32gb, but (as Nate said above) the AS11 can because it can format and read/write the ExFAT format commonly used for larger cards.  If it sees a blank card, or a format it doesn't recognize, the AS11 will reformat the card automatically using FAT32 or ExFAT format as appropriate for the size.  Even a 4gb card can handle years of data, so spending more for a larger card is of no benefit -- but the AS11 can handle them if that's what you have.

The machine internally stores up to 365 days of "summary/compliance" data and will copy that summary data onto the SD card whenever inserted.  However, detailed flow data is only written if the card is in the machine during therapy.

The card slot on the AS11 can be a little finicky.  For example, if the card is pushed in far enough to make a momentary contact just before being pushed in rest of the way, the machine will often put up an error and refuse to use the card.  If that happens, the solution is simply to remove the card and re-insert it again, making sure to insert it fully in one motion so there is no momentary contact.

The AS11 also throws up an appropriate error message if the card is write-protected, telling you to remove the card, unprotect it, and re-insert it.

Related to the latter two issues...  It is important to wait/watch the display for a bit after inserting a card.  There should be a message from the AS11 saying it is loading the card, then it should proceed to the normal menu after a few seconds.  If that message doesn't appear, or if an error message appears instead, then there's a problem and data will likely not be written to the card until the problem is resolved.