RE: Resmed Airsense 10 Autoset data
(10-03-2014, 03:27 PM)Lazer1234 Wrote: (10-03-2014, 01:04 PM)Asjb Wrote: Can anyone help please? Just started with the autoset airsense 10 . I would like to see detailed data but cannot get it off the SD card with ResScan 5.1. - it just says 'detailed data not available'. There seems nothing in the clinical settings about recording of details to the card. And nothing on any ResScan window that one can select to download details rather than just a summary. Could this be a function of the storage size of the SD card that comes with the machine? And, despite dire warnings! on a Resmed webpage that say not to replace the SD card with a non-Resmed-approved SD card (whatever that may be...), I am tempted to do just that i.e. a card with more storage. Any advice would be gratefully received, thank you.
If it is the same as the S9, so must the setting for the sleep quality is set to "ON"
On the AirSense 10, its called "Essentials On and Essentials Plus"
Essentials Plus is what you need
Also, when downloading, you'll need to select "all available data"
You can tick the Set these as my default options checkbox to save this setting
RE: Resmed Airsense 10 Autoset data
(10-03-2014, 03:59 PM)zonk Wrote: (10-03-2014, 03:27 PM)Lazer1234 Wrote: (10-03-2014, 01:04 PM)Asjb Wrote: Can anyone help please? Just started with the autoset airsense 10 . I would like to see detailed data but cannot get it off the SD card with ResScan 5.1. - it just says 'detailed data not available'. There seems nothing in the clinical settings about recording of details to the card. And nothing on any ResScan window that one can select to download details rather than just a summary. Could this be a function of the storage size of the SD card that comes with the machine? And, despite dire warnings! on a Resmed webpage that say not to replace the SD card with a non-Resmed-approved SD card (whatever that may be...), I am tempted to do just that i.e. a card with more storage. Any advice would be gratefully received, thank you.
If it is the same as the S9, so must the setting for the sleep quality is set to "ON"
On the AirSense 10, its called "Essentials On and Essentials Plus"
Essentials Plus is what you need
Also, when downloading, you'll need to select "all available data"
You can tick the Set these as my default options checkbox to save this setting
Hello and thank you very much. I finally found the way to select the "all available data box" - and now I can try and find out why I am getting very little sleep...
Success!
RE: Resmed Airsense 10 Autoset data
(10-03-2014, 03:27 PM)Lazer1234 Wrote: If it is the same as the S9, so must the setting for the sleep quality is set to "ON"
On the S9, "sleep quality" only affects the data display on the LCD, it doesn't affect the data recorded on the card.
Get the free OSCAR CPAP software here.
Useful links.
Click here for information on the main alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check it yourself.
RE: Resmed Airsense 10 Autoset data
(10-03-2014, 01:04 PM)Asjb Wrote: .... Could this be a function of the storage size of the SD card that comes with the machine? And, despite dire warnings! on a Resmed webpage that say not to replace the SD card with a non-Resmed-approved SD card (whatever that may be...), I am tempted to do just that i.e. a card with more storage. Any advice would be gratefully received, thank you.
The AirSense 10 comes with a 2GB (1.88GB available) SD card. Do did my 3.5-year-old RemStar Pro; after 3.5 years, that card has 1.81GB left. So space probably isn't a problem....
RE: Resmed Airsense 10 Autoset data
Hello. Vey good point !! - thank you for the reply
RE: Resmed Airsense 10 Autoset data
(09-04-2014, 11:07 AM)NickDanger Wrote: I had a bit of the hum on my first S9. A white noise generator on a very quiet setting (quieter than a typical window fan) was enough to drown it out. I'll trade you my new (relatively) S9 Autoset for it if you don't like the hum! :-)
To get rid of the hum, simlpy insulate the bottom of the machine from the surface it sits on - what you are hearing is the vibration of the motor that runs the compressor, and putting a triple folded towel under it will be enough to get rid of that.
RE: Resmed Airsense 10 Autoset data
There is a beta test version of SH available from where you download the current version and the beta version does read the data from the Autoset A10.
Hope this helps.
Chip
RE: Resmed Airsense 10 Autoset data
(10-22-2014, 10:34 PM)chiphead Wrote: There is a beta test version of SH available from where you download the current version and the beta version does read the data from the Autoset A10.
Yep, the current tested versions of SleepyHead are at:
http://www.sleepfiles.com/SH/
(There's also a link to that page at the top right of every forum page)
The newer testing versions (not fully tested yet, but should work with the new ResMed AirSense machines) can be downloaded here:
http://www.sleepfiles.com/SH/index.html?TestingVersions
SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
RE: Resmed Airsense 10 Autoset data
(10-22-2014, 01:34 AM)Asjb Wrote: Hello. Vey good point !! - thank you for the reply Hi Asjb,
WELCOME! to the forum.!
trish6hundred
RE: Resmed Airsense 10 Autoset data
Hi, I have the AirSense 10 and am loving it. Only been using a CPAP for a week but no more falling asleep during the day  I tried sleepy head with no success but downloaded ResScan and works a treat but I have the same issue when I try to view detailed data it says its not available.
Can anyone tell me if there is a way to get access to this data? I have done the select all data when downloading etc.
|
