04-15-2020, 07:03 PM
(This post was last modified: 04-15-2020, 07:03 PM by wacomme.)
RE: CPAP Wireless SD Card for The Rest of Us
Here's the SD card's CONFIG file:
[WLANSD]
DHCP_Enabled=NO
IP_Address=10.0.0.250
Subnet_Mask=255.255.255.0
null
null
null
null
null
null
null
null
null
null
[Vendor]
APPMODE=5
APPNAME=Michael
PRODUCT=FlashAir
VENDOR=TOSHIBA
APPSSID=michaelmolly
LOCK=1
DNSMODE=1
APPAUTOTIME=0
COMMAND=fat cp /SD_WLAN/BCONFIG 1:/BCONFIG
MASTERCODE=00223f032dca
UPLOAD=1
APPNETWORKKEY=**********
NOISE_CANCEL=2
STA_RETRY_CT=0
Can I just modify the CONFIG in TextEdit?
RE: CPAP Wireless SD Card for The Rest of Us
I'm now a bit lost on how to proceed.
Michael
RE: CPAP Wireless SD Card for The Rest of Us
Yes you can edit this file. Change the IP address to one of the ones I suggested. Just remember to replace the asterisks in the "APPNETWORKKEY=" with your Wi-Fi password and save the file as a Windows compatible file (CR+LF). Since you will be performing this editing while the FlashAir in connected to your computer, after the edit, unmount or eject (again Mac verbiage is unknown to me) the card. Wait a second and re-insert back into your Mac's SD slot. Give it enough time to initialize and negotiate with your Wi-Fi access point. Go to your web browser and enter the IP you assigned your card. If it is working, it will display a web page of the directories on the card.
RE: CPAP Wireless SD Card for The Rest of Us
(04-15-2020, 07:18 PM)Crimson Nape Wrote: If it is working, it will display a web page of the directories on the card.
Yes. It's working!!!! Now what?
RE: CPAP Wireless SD Card for The Rest of Us
Your CONFIG file contained code for Sleep Master. This configuration can still can be used for FlashPAP without modification. Regardless of which download software you choose, you will need to create a dedicated directory on your computer to copy the FlashAir card data to. At this point I can only guide you if you decided to use FlashPAP. With that said, both apps have very good documentation and provide card setup within the app.
Holler if you need any more help.
-Red
RE: CPAP Wireless SD Card for The Rest of Us
How do I connect the SD in my machine to my Mac and the Oscar program?
RE: CPAP Wireless SD Card for The Rest of Us
You use either Sleep Master or FlashPAP to download the SD card's data to a directory on your computer then you point OSCAR to this directory to import the data for analysis.
RE: CPAP Wireless SD Card for The Rest of Us
Since I continue to get the same error with SleepMaster I might as well try FlashPAP.
RE: CPAP Wireless SD Card for The Rest of Us
I made it this far. Now what?
RE: CPAP Wireless SD Card for The Rest of Us
I think I have it working. I'll check it tomorrow morning after a night's sleep. Do I need to use FlashPAP to get it to work, or do I just use OSCAR and the Import button pointed to the FlashPAP files?
