Hello Guest,
Welcome to Apnea Board !
/
Can't keep my mask on
|
Can't keep my mask on
|
Dzoker
Posts: 7 Threads: 2 Joined: May 2022
Machine: ResMed AirSense 11
Can't keep my mask on
Hi, how do I deal with my random removal of my mask during the night? I know for 100% that I manually take off the mask at some point of the night and it is at random times, no pattern. I did it when I was using the P10 and same with the p30i. How do you manage to keep your mask on?
staceyburke
Posts: 3,697 Threads: 15 Joined: Jun 2020
Machine: Resmed AirCurve VAUTO
06-20-2022, 12:42 PM
RE: Can't keep my mask on
Post your OSCAR charts.... please include flow limits and pressures in the charts. What do you have the EPR set to and is it full time?
Apnea (80-100%) 10 seconds, Hypopnea (50-80%) 10 seconds, Flow Limits (0-50%) not timed Cervical Collar - Dealing w DME - Chart Organizing
Dzoker
Posts: 7 Threads: 2 Joined: May 2022
Machine: ResMed AirSense 11
staceyburke
Posts: 3,697 Threads: 15 Joined: Jun 2020
Machine: Resmed AirCurve VAUTO
06-20-2022, 03:11 PM
RE: Can't keep my mask on
I think part of your problem is lack of air. It happens each night when you start to get more flow limits and the pressure raises and with it leaks. Some look like mouth leaks. I would try to raise the min to 9 and keep the EPR set at 3 full time. Be sure to adjust the mask while lying in your sleep position. Those two things should help. Usually to low of a pressure will cause you to take the mask off to get more air.
Apnea (80-100%) 10 seconds, Hypopnea (50-80%) 10 seconds, Flow Limits (0-50%) not timed Cervical Collar - Dealing w DME - Chart Organizing
Dzoker
Posts: 7 Threads: 2 Joined: May 2022
Machine: ResMed AirSense 11
06-20-2022, 06:57 PM
RE: Can't keep my mask on
Ha, makes sense.. I will try tonight with the new setting. One more question, should the P30i be snug/tight on mu nose or lightly tight?
TYVM
clownbell
Posts: 537 Threads: 11 Joined: Mar 2021
Machine: ResMed AirSense 10 Autoset
06-20-2022, 07:05 PM
RE: Can't keep my mask on
With most masks, AFAIK, lightly tight would be about right. The most common mistake is to have the mask TOO tight, which distorts the silicone and actually causes a leak. I find that just after I put the mask on, the best thing is to pull it loose a bit and then reset it. That way you can be sure the seal is fully inflated. And of course all that assumes that you have the proper pillow size.
Dzoker
Posts: 7 Threads: 2 Joined: May 2022
Machine: ResMed AirSense 11
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Difference between nasal mask, and full face mask setting | Ynot | 6 | 985 |
09-04-2024, 05:38 PM Last Post: Big Guy |
|
| CPAP mask straps are loose and no longer keep the mask on my face | WWu777 | 8 | 3,816 |
03-29-2023, 08:12 AM Last Post: DaveL |
|
| Resmed P30i pillow mask user unable to get beyond 1.5 hr on mask | Roy289 | 28 | 4,464 |
09-27-2022, 10:47 AM Last Post: Roy289 |
|
| Advice for f and p vitera mask leaks full face mask | accetableplaintain | 2 | 5,245 |
03-23-2022, 09:37 AM Last Post: SarcasticDave94 |
|
| Help with mask, Definition of EPAP/IPAP and Mask Pressure | wesozzzz | 1 | 1,313 |
11-15-2019, 07:57 PM Last Post: Sleepster |
|
| What's the mask setting of Dreamstation for Bleep DreamPort mask? | ChinaMan | 5 | 2,804 |
10-11-2019, 07:17 PM Last Post: ChinaMan |
|
| Changing mask from p10 resmed to philips respironics: Mask seal issue | Visitor | 10 | 5,230 |
10-11-2019, 07:25 AM Last Post: Sleeprider |
|
/
Can't keep my mask on
