Hello Guest,
Welcome to Apnea Board !
/
Devilbiss Intellipap disassembly
|
Devilbiss Intellipap disassembly
|
REMember
Posts: 48 Threads: 5 Joined: Sep 2012
Machine: Resmed VPAP Auto, Devilbis IntelliPAP
03-29-2022, 04:23 PM
Devilbiss Intellipap disassembly
Greetings, all. Is it possible to open up the case of the Devilbiss Intellipap in order to clean the impeller? I turned on a machine that sat for more than 10 years and it inhaled a badly deteriorated air filter. The screws securing the case appear to be 6-lobe, CD pattern screws. What tool do I need to remove them? Once inside, can I get to the impeller?
REMember
Posts: 48 Threads: 5 Joined: Sep 2012
Machine: Resmed VPAP Auto, Devilbis IntelliPAP
03-29-2022, 04:49 PM
RE: Devilbiss Intellipap disassembly
Ruh Roh... The machine blows out very small pieces of black, disintegrating foam. When I try to clean it up, it leaves black, tar-like smears. I assumed that these were pieces of the air filter... until I just watched this on Youtube. Thoughts? https://www.youtube.com/watch?v=lMrX6QEysJY
Gideon
Wiki Editor 
Posts: 12,828 Threads: 295 Joined: Dec 2016
Machine: ResMed Aircurve 10 VAuto
03-29-2022, 05:25 PM
RE: Devilbiss Intellipap disassembly
Did you ever use ozone to "clean" it?
Gideon - Project Manager Emeritus for OSCAR - Open Source CPAP Analysis Reporter
Download OSCAR OSCAR - The Guide New to Apnea? Helpful tips to ensure success Soft Cervical Collar Mask Primer Dealing with a DME Organize Charts Optimizing Therapy
REMember
Posts: 48 Threads: 5 Joined: Sep 2012
Machine: Resmed VPAP Auto, Devilbis IntelliPAP
03-29-2022, 05:46 PM
RE: Devilbiss Intellipap disassembly
No, I didn't. I'm just now reading about the Phillips recall...
RNeil
Posts: 185 Threads: 9 Joined: Oct 2018
Machine: Resmed Airsense 10 Autoset
03-30-2022, 03:43 PM
RE: Devilbiss Intellipap disassembly
The filter should be white so you can see if it's dirty. I don't know what a "CD" pattern is. I suspect you are talking about torx screws, drivers are available at any hardware store.
REMember
Posts: 48 Threads: 5 Joined: Sep 2012
Machine: Resmed VPAP Auto, Devilbis IntelliPAP
03-31-2022, 07:27 AM
RE: Devilbiss Intellipap disassembly
Many thanks. I was referring to the pre-filter, which is dark-colored foam. It crumbled when I removed it. Now that I see what's inside the machine, it doesn't look serviceable to me, but this is what the screw head looks like. A google search identifies it as a six-lobe, pattern screw.
I have a Devilbiss IntelliPAP that blows out small bits of foam... interesting...
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| [Diagnosis] DeVilbiss DV54 Sleepcube, Analysing the Smartcode | trudgentim | 0 | 247 |
10-01-2024, 05:05 PM Last Post: trudgentim |
|
| DreamStation 2 Disassembly ? | M Friedman | 2 | 1,600 |
07-16-2024, 09:54 PM Last Post: Joerichmond |
|
| [CPAP] DeVilbiss Smartlink Module DV5M fault | innovativekiwi | 2 | 1,128 |
05-28-2024, 06:42 PM Last Post: sauerkraut |
|
| ResMed blower motor disassembly | PinehillJoe | 3 | 534 |
04-15-2024, 09:54 PM Last Post: Phaleronic |
|
| Disassembly of F&P Icon | Hanrahan | 6 | 4,244 |
10-19-2023, 09:46 PM Last Post: Thanya |
|
| IntelliPAP 2 & IntelliPAP Blue (DV63 & DV64) Service Manual now available | SuperSleeper | 0 | 622 |
11-21-2022, 04:32 PM Last Post: SuperSleeper |
|
| OSCAR + Devilbiss DV64 questions | Cuppa | 6 | 898 |
11-19-2022, 03:12 PM Last Post: Cuppa |
|
/
Devilbiss Intellipap disassembly
