RE: [EzShare SDcard wifi] Script to autodownload
Yes, I get the following output:
back to photo
Directory Index of A:
2022- 9- 7 13: 8:16 <DIR> System Volume Information
2022-10-17 9:26:54 <DIR> .Spotlight-V100
2022-10-17 9:31: 2 64KB Journal.dat
2022-10-17 9:28:38 <DIR> DATALOG
2022-10-17 9:30:20 4KB ._DATALOG
2016-11-12 21:36:36 0KB EZSHARE.CFG
2022- 9-21 13:48:12 1KB Identification.crc
2022-10-17 9:30:20 4KB ._Identification.crc
2022- 9-21 13:48:12 1KB Identification.tgt
2022-10-17 9:30:20 4KB ._Identification.tgt
2022-10-17 9:28:38 <DIR> SETTINGS
2022-10-17 9:30:20 4KB ._SETTINGS
2022-10-31 12:10: 0 97KB STR.EDF
Total Entries: 13
Total Size: 179KB
RE: [EzShare SDcard wifi] Script to autodownload
I don't know if this matters, but what didn't show up in the above post is that there is a space before each of the file names -- which was removed by the web interface when I copied and pasted, but appears to be part of the name since the space is underlined along with the rest of the name.
RE: [EzShare SDcard wifi] Script to autodownload
Mine is a little different. I'm unsure why...
Code:
back to photo
Directory Index of A:
2016-11-12 21:36:36 0KB ezshare.cfg
2021-11-26 16:43: 6 64KB Journal.dat
2021-11-26 16:43:12 1KB Identification.tgt
2021-11-26 16:43:12 1KB Identification.crc
2021-11-26 16:43:12 <DIR> DATALOG
2021-11-26 16:43:14 <DIR> SETTINGS
2022-11- 1 12:10: 0 100KB STR.edf
Total Entries: 7
Total Size: 166KB
RE: [EzShare SDcard wifi] Script to autodownload
I recently got the ezshare off walmart, and seems to be the correct one to work with all the scripts. I am having an issue with the card where it seems to stop broadcasting its ssid after a bit which would make any scripting around it pointless. I need to reseat the card into my airsense everytime to get it to start broadcasting again. Anyone know if there is a way to get it to continuously broadcast, or did i receive a dud?
RE: [EzShare SDcard wifi] Script to autodownload
The AS10 had a power save feature that would basically shut down the SD card's power. (Big power savings!) I'm wondering if the AS11 has something like this. On the AS10, you activated it by holding down the power button for 5 seconds or longer when turning it off. Starting the CPAP takes it out of the low power mode.
Most of the Wi-Fi SD cards only broadcast an SSID during bootup. If you are using the EZ-share, it will use the 192.168.4.xxx network address range. The card will use the address of 192.168.4.1. If your home network is using a 192.168.1.xxx, you could try changing the subnet mask to, 255.255.0.0 (on some systems this is defined as "/16"). Of course, you will need to set your computer's IP to static if you're currently using DHCP (automatic IP assignment)
As I write this, I seem to remember that the card has a configurable SSID and password.
Good luck!
- Red
RE: [EzShare SDcard wifi] Script to autodownload
Seems maybe my card is trash. I got the scripts and stuff to pull data fine, and was going to work on setting up a cron job but decided to check OSCAR. It has no graph data for the days where i had the ezshare card in. So its not reading it properly io guess.
RE: [EzShare SDcard wifi] Script to autodownload
Most of the newer SD cards use a microSD inside a larger package. For ones like the EZ-share, they add a totally separate Wi-Fi chip. In fact, EZ-share has a Wi-Fi SD carrier that allows the changing of the microSD card.
If your card does not store data, using a razor blade or Exacto knife split the case open. On the lower left side should be the microSD chip. Try replacing it, and you can tape the outer shell halves back together.
I just looked at my EZ-share, and it is the Wi-Fi carrier package only and has a cutout in the back left edge for easy replacement of the microSD card.
- Red
RE: [EzShare SDcard wifi] Script to autodownload
Is 64gb still verified as the hard cap on size for the resmed(10) machines? Also is the wifi network a hidden ssid? I'm not seeing it show up in the list of ap's on both the phone and my linux pc with wifi built in.
RE: [EzShare SDcard wifi] Script to autodownload
There is an Android and iOS configuration app named, WIFI@SDCF. You can configure the card using it.
- Red
02-18-2023, 08:18 PM
(This post was last modified: 02-18-2023, 08:31 PM by famewolf.)
RE: [EzShare SDcard wifi] Script to autodownload
I'd have to first connect to the wifi before I could do anything with the card. It's not showing up on android or linux...so nothing to connect to.
I'm aware of the ssid "ez share" and the default password of 8 8's. (although it doesn't specify which security it's using...wpa2?)
