I'm using a Flashair and FlashPAP. It was working seamlessly for a couple weeks. Then, every day now, the FlashPAP throws the error 'Connection refused. Try reinserting card into xPAP machine'. Does so does fix the problem, but I have to do it every day. Any ideas for how to fix this permanently?
Hello Guest,
Welcome to Apnea Board !As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
FlashPAP / Flashair - Connection Refused?
|
09-23-2016, 11:40 AM
FlashPAP / Flashair - Connection Refused?
Hey all,
I'm using a Flashair and FlashPAP. It was working seamlessly for a couple weeks. Then, every day now, the FlashPAP throws the error 'Connection refused. Try reinserting card into xPAP machine'. Does so does fix the problem, but I have to do it every day. Any ideas for how to fix this permanently?
09-23-2016, 07:20 PM
RE: FlashPAP / Flashair - Connection Refused?
The antenna on FlashAir is not the greatest. How far away from your CPAP machine is your wifi router? Is there anything near your wifi router or CPAP machine that might cause interference? For example TV, fan, other electrical devices (other than CPAP machine), located on floor 1 with your CPAP on floor 2 and floor has in-floor radiant heating (insulation could block wifi signals).
Check you have these lines in your CONFIG in SD_WLAN APPMODE=5 APPAUTOTIME=0 NOISE_CANCEL=0 STA_RETRY_CT=0
Using FlashAir W-03 SD card in machine. You can download your data through wifi with FlashPAP or Sleep Master utilities.
I wanted to learn Binary so I enrolled in Binary 101. I seemed to have missed the first four courses. Stick it to the man, Download OSCAR and take back control of your data! Thanks Ian. Like I didn't have enough Honey-Do projects to tackle.
03-26-2017, 08:12 AM
RE: FlashPAP / Flashair - Connection Refused?
IMSleeplessInSeattle, did you ever find a solution to the Connection Refused issue? I have not had any data transfer issues for 2+ months and now all of a sudden I am getting this error message. Reinserting the card has not rectified the issue.
Thanks!
03-26-2017, 09:18 AM
RE: FlashPAP / Flashair - Connection Refused?
The only reliable way I have cured this issue is by reformatting the card and setting the card back up again. Flashair cards are relatively poor imo, but they are the best we have!
To format:
03-26-2017, 09:33 AM
RE: FlashPAP / Flashair - Connection Refused?
what comes immediately to mind if every thing worked fine - no settings where changed (or lost or overwritten in the wifi-card AND the router) is:
DHCP-lease time^^ workaround: assign a static IP ... best way to do that is in the router^^ - just let the card always have the same ip (and if you are already there - change the lease-time to something that actually makes sense for your network^^)
03-26-2017, 10:41 AM
RE: FlashPAP / Flashair - Connection Refused?
Another way to set a static IP is to put these lines in your CONFIG in SD_WLAN
[WLANSD] DHCP_Enabled=NO IP_Address=192.168.1.201 Subnet_Mask=255.255.255.0
Using FlashAir W-03 SD card in machine. You can download your data through wifi with FlashPAP or Sleep Master utilities.
I wanted to learn Binary so I enrolled in Binary 101. I seemed to have missed the first four courses. Stick it to the man, Download OSCAR and take back control of your data! Thanks Ian. Like I didn't have enough Honey-Do projects to tackle.
03-27-2017, 02:00 PM
RE: FlashPAP / Flashair - Connection Refused?
Thanks all! That was exactly what happened - the IP address was changed.
04-16-2018, 01:01 AM
RE: FlashPAP / Flashair - Connection Refused?
Sorry for hijacking an old thread, but I'm having the same issue. In my case, it's not IP address or signal strength that's a problem, my FlashAir is sucessfully connecting to the wireless in client mode, and I can browse the FlashAir GUI from other devices, yet FlashPap constantly says Connection Refused. Any suggestions?
04-16-2018, 03:59 AM
RE: FlashPAP / Flashair - Connection Refused?
In flashpap are you using the ipaddress just flashpap should work, make sure you have no proxy’s configured in internet explorer if you are using a windows machine as it will try and use any placed in there
04-17-2018, 11:12 AM
RE: FlashPAP / Flashair - Connection Refused?
Can you post your flashair config?
(04-16-2018, 01:01 AM)alanarthur Wrote: Sorry for hijacking an old thread, but I'm having the same issue. In my case, it's not IP address or signal strength that's a problem, my FlashAir is sucessfully connecting to the wireless in client mode, and I can browse the FlashAir GUI from other devices, yet FlashPap constantly says Connection Refused. Any suggestions?
Using FlashAir W-03 SD card in machine. You can download your data through wifi with FlashPAP or Sleep Master utilities.
I wanted to learn Binary so I enrolled in Binary 101. I seemed to have missed the first four courses. Stick it to the man, Download OSCAR and take back control of your data! Thanks Ian. Like I didn't have enough Honey-Do projects to tackle. |
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Toshiba FlashAir SD Card, Mac (M2), OSCAR Setup Help | WarDaddy427 | 1 | 482 |
10-02-2024, 01:25 AM Last Post: donsburg |
|
Wellue/Viatom Checkme O2 connection problem | AndyB | 22 | 4,602 |
08-05-2024, 04:29 PM Last Post: Cape67 |
|
Toshiba FlashAir on Mac Notes | mtwomey | 12 | 3,043 |
06-29-2024, 09:36 AM Last Post: risherwood |
|
Flashair - Dreamstation -> Airsense 11 Autoset | todivefor | 14 | 1,412 |
02-28-2024, 07:22 PM Last Post: Crimson Nape |
|
PC connection Weinmann SOMNObalance fails | HoogendoornJH | 5 | 1,325 |
01-24-2024, 09:50 AM Last Post: gblin |
|
[split] FYSETC SD Wifi - Possible FlashAir Replacement | Psikic | 131 | 27,430 |
01-12-2024, 11:59 AM Last Post: scowell |
|
FlashPAP - FlashAir WiFi SD card utility | TiredToo | 296 | 105,076 |
10-05-2023, 06:54 AM Last Post: olddog27 |