Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

My battery backup setup
#1
My battery backup setup
The power went out a week and a half ago. This finally prompted me to get myself a battery backup setup for my spare ResMed S9 AutoSet.

ML35-12 Mighty Max 35 amp-hour AGM wheelchair/scooter battery ($63.99 on Amazon)
ResMed 12v-24v DC-DC converter ($84.95 from an online DME)
0.75 amp Battery Tender Jr.($27.69 on Amazon)

[Image: 16922865986_c2d4bd28bc_c.jpg]

With a deep cycle AGM battery, you're supposed to be able to draw the battery down to 20%. With a 35 amp-hour battery, that gives me 28 amp-hours of usable power.

According to the ResMed battery guide, with the slimline hose and no humidifier using my settings, it draws about an amp at 12v. I should be able run it on the boat for 3 days and not need to worry about killing my boat's battery bank. With the heated ClimateLine hose and the humidifier running, I should get most of a night out of it.

http://www.resmed.com/us/dam/documents/a...lo_eng.pdf


Post Reply Post Reply
#2
RE: My battery backup setup
Good to go. Just remember to ditch the pictured humidificator.

OMM
Post Reply Post Reply
#3
RE: My battery backup setup
Man that's a gnarly set up!
Post Reply Post Reply
#4
RE: My battery backup setup
I like it. You might want to put an Ammeter inline with the CPAP 12-24 Volt converter positive lead and test the actual current pulled.
Most DVMs can measure current in the range of interest. My Fluke certainly can.
Admin Note:
JustMongo passed away in August 2017
Click HERE to read his Memorial Thread

~ Rest in Peace ~
Post Reply Post Reply
#5
RE: My battery backup setup
You could have wired 2 12 volt batteries together to give you 24V instead of 1 battery and the $85 12V to 24V converter... This would double your battery life, and save you $21.
Post Reply Post Reply
#6
RE: My battery backup setup
(03-28-2015, 06:15 PM)player Wrote: You could have wired 2 12 volt batteries together to give you 24V instead of 1 battery and the $85 12V to 24V converter... This would double your battery life, and save you $21.

That apparently doesn't work. There's a third wire on the connector with some undocumented signal. The S9 won't work unless it sees the signal. Someone reported that they monitored it and it was some sort of serial data signal.

I don't know of any source for the connector, either. You'd have to cut the connector off of an existing ResMed S9 power brick or adapter.
Get the free OSCAR CPAP software here.
Useful links.
Click here for information on the main alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check it yourself.
Post Reply Post Reply
#7
RE: My battery backup setup
Also for 24 Volts there are 12 lead-acid cells in series. The Voltage will vary depending upon state of charge from about 25.2 to 23.4 -- the converter compensates for that.
Admin Note:
JustMongo passed away in August 2017
Click HERE to read his Memorial Thread

~ Rest in Peace ~
Post Reply Post Reply
#8
RE: My battery backup setup
(03-27-2015, 05:04 PM)GeoffD Wrote: The power went out a week and a half ago. This finally prompted me to get myself a battery backup setup for my spare ResMed S9 AutoSet.

ML35-12 Mighty Max 35 amp-hour AGM wheelchair/scooter battery ($63.99 on Amazon)
ResMed 12v-24v DC-DC converter ($84.95 from an online DME)
0.75 amp Battery Tender Jr.($27.69 on Amazon)

[Image: 16922865986_c2d4bd28bc_c.jpg]

With a deep cycle AGM battery, you're supposed to be able to draw the battery down to 20%. With a 35 amp-hour battery, that gives me 28 amp-hours of usable power.

According to the ResMed battery guide, with the slimline hose and no humidifier using my settings, it draws about an amp at 12v. I should be able run it on the boat for 3 days and not need to worry about killing my boat's battery bank. With the heated ClimateLine hose and the humidifier running, I should get most of a night out of it.

http://www.resmed.com/us/dam/documents/a...lo_eng.pdf

What kind of boat?
I use my PAP machine nightly and I feel great!
Updated: Philips Respironics System One (60 Series)
RemStar BiPAP Auto with Bi-FlexModel 760P -
Rise Time x3 Fixed Bi-Level EPAP 9.0 IPAP 11.5 (cmH2O)
Post Reply Post Reply
#9
RE: My battery backup setup
(03-28-2015, 01:37 PM)justMongo Wrote: I like it. You might want to put an Ammeter inline with the CPAP 12-24 Volt converter positive lead and test the actual current pulled.
Most DVMs can measure current in the range of interest. My Fluke certainly can.

Remember, when it comes to multi-meters, if you find one that works well, it's a Fluke.

OMMOHY
Model 87 V
Post Reply Post Reply
#10
RE: My battery backup setup
(05-11-2015, 07:13 PM)Mark Douglas Wrote: What kind of boat?

Nothing too big...
[Image: Typhoon3.jpg]
Admin Note:
JustMongo passed away in August 2017
Click HERE to read his Memorial Thread

~ Rest in Peace ~
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  HDM Z1 Battery Replacement Ephraim 14 5,791 11-14-2024, 02:59 PM
Last Post: SteveB260
  Best Backup CPAP Machine Options? Lucid 14 540 11-14-2024, 10:21 AM
Last Post: jake79
  [Equipment] Need advice for battery gennadyd 10 359 11-13-2024, 07:16 PM
Last Post: Polo 1955
  Battery Backup.... ZacharySimon 1 222 10-28-2024, 08:26 PM
Last Post: Crimson Nape
  Battery backup question PaulaO2 11 585 10-28-2024, 08:01 PM
Last Post: PaulaO2
  [Equipment] Powering Transcend Micro via battery - as simple as a barrel to USB-C trigger cable? emveelee 0 156 10-22-2024, 09:58 PM
Last Post: emveelee
  Tech Nerds-think this battery setup will work for Transcend Micro? johnbrain 15 1,679 10-08-2024, 05:21 PM
Last Post: Phaleronic


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.