Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.
Login or Create an Account
Machine: Philips Respironics Remstar Pro C-Flex+ Mask Type: Nasal pillows Mask Make & Model: Fisher & Paykel EVORA Humidifier: Respironics System One Heated Humidifier with Heated Tube CPAP Pressure: 10 cm (reduced from 14cm) CPAP Software: OSCAR
EncoreBasic
Other Comments: Intermittently use CMS50D+ Oximeter
When I look at the Daily View Screen, at the bottom centre, Date and Time are displayed.
The date is correct but the time displayed is 10 hours earlier than the time shown in the Event, or Flow Rate or Pressure graphs. eg Event Flags screeen shows 23:34 to 06:10 whilst the Daily Screen shows 13:24:35 to 20:10:46.
My Profile setting is correct as evidence by the correct times on other graphs.
Any ideas?
(05-20-2019, 11:29 PM)graeme Wrote: When I look at the Daily View Screen, at the bottom centre, Date and Time are displayed.
The date is correct but the time displayed is 10 hours earlier than the time shown in the Event, or Flow Rate or Pressure graphs. eg Event Flags screeen shows 23:34 to 06:10 whilst the Daily Screen shows 13:24:35 to 20:10:46.
My Profile setting is correct as evidence by the correct times on other graphs.
Any ideas?
Just to confirm, is the time zone in your profile set to +10 (Brisbane, Melbourne, Hobart, etc.)?
Apnea Board Monitors are members who help oversee the smooth functioning of the Board. They are also members of the Advisory Committee which helps shape Apnea Board's rules & policies. Membership in the Advisory Members group does not imply medical expertise or qualification for advising Sleep Apnea patients concerning their treatment.
Machine: Philips Respironics Remstar Pro C-Flex+ Mask Type: Nasal pillows Mask Make & Model: Fisher & Paykel EVORA Humidifier: Respironics System One Heated Humidifier with Heated Tube CPAP Pressure: 10 cm (reduced from 14cm) CPAP Software: OSCAR
EncoreBasic
Other Comments: Intermittently use CMS50D+ Oximeter
Machine: Philips Respironics Remstar Pro C-Flex+ Mask Type: Nasal pillows Mask Make & Model: Fisher & Paykel EVORA Humidifier: Respironics System One Heated Humidifier with Heated Tube CPAP Pressure: 10 cm (reduced from 14cm) CPAP Software: OSCAR
EncoreBasic
Other Comments: Intermittently use CMS50D+ Oximeter
Machine: Philips Respironics Remstar Pro C-Flex+ Mask Type: Nasal pillows Mask Make & Model: Fisher & Paykel EVORA Humidifier: Respironics System One Heated Humidifier with Heated Tube CPAP Pressure: 10 cm (reduced from 14cm) CPAP Software: OSCAR
EncoreBasic
Other Comments: Intermittently use CMS50D+ Oximeter
I have found the reason for my recent post re observations of Time Differences as illustrated in the screen dumps.
The time displayed is actually a UTC time range, (used to determine the duration of an event, eg. Periodic Breathing), selected by using the left and right mouse cursor combinations.
I want to display a cursor centred on the particular event.
This is achieved as follows:-
Select DAILY view.
TOGGLE LINE CURSOR OFF
This will show the Date and UTC RANGE.
TOGGLE LINE CURSOR ON
This will display the Date and LOCAL TIME.
Thank you for bringing this to our attention. I have never tried that particular function. I'm not sure that displaying the time range of the data in UTC is particularly useful. At first I thought it was because you are using a Respironics machine (which stores the data with UTC times), but it does the same with my ResMed data.
I will add this to our issues list.
Apnea Board Monitors are members who help oversee the smooth functioning of the Board. They are also members of the Advisory Committee which helps shape Apnea Board's rules & policies. Membership in the Advisory Members group does not imply medical expertise or qualification for advising Sleep Apnea patients concerning their treatment.
