OSCAR Release v1.1.0 [older version]

[Gideon]

OSCAR v1.1.0 is now Released!!  

It has been a long time coming.

Here are the highlights, the release notes.

Changes and fixes in OSCAR v1.1.0
Portions of OSCAR are © 2019-2020 by The OSCAR Team

• [new] Additional Philips Respironics devices tested and fully supported:
  • DreamStation Auto CPAP (500X180)
    
• [new] Add support for DreamStation humidifier passover and error modes.
  
• [fix] Fix an rc-1 regression in pressure relief display on the Statistics page.
  
• [fix] Fix the minutes-at-pressure graph for Philips Respironics devices.
  

Changes and fixes in OSCAR v1.1.0-rc-1
Portions of OSCAR are © 2019-2020 by The OSCAR Team

• [fix] AHI and Usage bars in overview graphs now show the correct height when oximetry usage is significantly longer than CPAP usage.
  
• [fix] Improved import of Philips Respironics settings. In particular:
  • The settings for PC, S, and S/T modes are now displayed correctly.
    
  • AVAPS settings are now displayed correctly, including target tidal volume.
    
  • Backup breath settings are now imported and displayed.
    
  • The settings for CPAP-Check and Auto-Trial modes are now displayed correctly.
    
• [fix] Fix the reported duration for extremely long sessions on DreamStation CPAP and BiPAP devices
  
• [new] Additional Philips Respironics devices tested and fully supported:
  • DreamStation Auto CPAP (500X120)
    
• [fix] Fix regression in Welcome page pressure display
  
• [fix] Several crashes have been fixed.
  

Changes and fixes in OSCAR v1.1.0-beta-2
Portions of OSCAR are © 2019-2020 by The OSCAR Team

• [new] Add preliminary support for Viatom/Wellue pulse oximeters
  
• [new] Add support for Dreem hypnograms
  
• [new] Extensive reorganization of the ResMed loader to facilitate understanding and future improvements
  
• [new] Additional Philips Respironics devices tested and fully supported:
  • DreamStation Auto CPAP (500X130)
    
• [new] Add a menu option to create a zip from an SD card
  
• [new] Ask where to save screenshots
  
• [new] Alert users when unexpected Philips Respironics data is encountered during import
  
• [fix] Add support for CPAP mode on DreamStation BiPAP S/T and AVAPS
  
• [fix] Pinch-to-zoom now works as expected
  
• [fix] The Philips Respironics loader now respects the "ignore old sessions" preference
  
• [fix] Improved handling of discontinuous Philips Respironics data
  
• [fix] Improved import of Philips Respironics flex and humidification settings
  
• [fix] Fix incorrect display of tube diameter on some Philips Respironics devices
  
• [fix] Fix missing "Bi-Flex" label for bi-level DreamStations
  
• [fix] Fix crashes in ZEO loader
  
• [fix] Fix several memory leaks
  

Changes and fixes in OSCAR v1.1.0-beta-1
Portions of OSCAR are © 2019 by The OSCAR Team

• [new] Extensive overhaul of the Philips Respironics System One importer, resolving all previously reported issues.
  
• [new] The following Philips Respironics devices are now tested and fully supported:
  • REMstar Plus (System One) (251P),
    
  • REMstar Pro (System One) (450P, 451P),
    
  • REMstar Auto (System One) (550P, 551P),
    
  • BiPAP Auto (System One) (750P),
    
  • BiPAP AutoSV Advanced System One (950P, 951P),
    
  • REMstar Pro (System One 60 Series) (460P, 461P),
    
  • REMstar Auto (System One 60 Series) (560P, 561P, 562P, 560PBT),
    
  • BiPAP Pro (System One 60 Series) (660P),
    
  • BiPAP Auto (System One 60 Series) (760P),
    
  • BiPAP autoSV Advanced (System One 60 Series) (960P, 961P),
    
  • BiPAP autoSV Advanced 30 (System One 60 Series) (960T),
    
  • BiPAP S/T 30 (System One 60 Series) (1061T),
    
  • BiPAP AVAPS 30 (System One 60 Series) (1160P),
    
  • DreamStation CPAP (200X110),
    
  • DreamStation CPAP Pro (400X110, 400X150),
    
  • DreamStation Go (400G110),
    
  • DreamStation Auto CPAP (500X110, 500X150),
    
  • DreamStation Go Auto (500G110, 502G150),
    
  • DreamStation BiPAP Pro (600X110),
    
  • DreamStation Auto BiPAP (700X110),
    
  • DreamStation BiPAP autoSV (900X110, 900X120),
    
  • DreamStation BiPAP S/T 30 (1030X110),
    
  • DreamStation BiPAP S/T 30 with AAM (1030X150),
    
  • DreamStation BiPAP AVAPS 30 (1130X110),
    
  • DreamStation BiPAP AVAPS 30 AE (1131X150)
    
  • Note: The settings for PC, S, and S/T modes are still displayed incorrectly.
    
• [new] Update translation files and add new languages
  
• [new] Allow user to reset graph order on the Daily page to Standard (for CPAP and APAP) or Advanced order (for ASV and AVAPS modes)
  
• [new] Add preference setting to include the serial number on machine settings list
  
• [fix] Place date, time, and Oscar version information in report footers
  
• [fix] Update identification of ResMed S9 devices on the Welcome page
  
• [fix] Correct formatting of event number in the Daily Events tab
  
• [fix] Correct timezone offset for SomnoPose imports
  
• [fix] Show a progress bar when setting the Overview range to a large number of days
  
• [fix] Make session bars on the Daily page clearer by using a better color
  
• [fix] Improve list of devices on the Statistics page
  
• [fix] Report Pressure when IPAP data is missing
  
• [fix] Implement Refresh button on the Profile page
  

Changes and fixes in OSCAR v1.1.0-testing-4
Portions of OSCAR are © 2019 by The OSCAR Team

• [new] Windows installers support Oscar, Oscar 32-bit, Oscar (test) and Oscar 32-bit (test)
  
• [fix] Release builds use a Settings key of OSCAR, Test builds use OSCAR-test, and Branch builds use OSCAR-branch. Default data directories are similarly named.
  
• [fix] Overview chart problems when both CPAP and Oximetry data were included fixed
  
• [fix] Translations updated for all languages. Spanish (Mexico) and Norwegian languages added
  
• [fix] All languages now available on Mac
  
• [fix] Date bar on the bottom of the Daily graph now in the local time when no line cursor displayed, and formatting improved
  
• [fix] 100% zoom now works on the Overview page
  
• [fix] View/Reset Graphs now enables all graphs and all event flags
  
• [fix] Calendar date now formatted per national settings
  
• [fix] Toggle buttons on the Daily page's session list and event and chart pulldowns changed to checkboxes
  

Changes and fixes in OSCAR v1.1.0-testing-3
NOTE: Translations have NOT yet been updated for these changes
Portions of OSCAR are © 2019 by The OSCAR Team

• [new] DreamStation BiPAP S/T and AVAPS ventilators (1030X and 1130X) are now supported. The settings aren't yet displayed correctly, but therapy events and graphs should now display properly.
  
• [new] View/Reset Graphs organizes graphs in their original order
  
• [fix] Format dates for the national region as reported by the operating system
  
• [fix] Improve progress bar for the Statistics cache update
  
• [fix] Correct calculations of seven-day AHI and leak rate on the Welcome page
  
• [fix] Clarify AHI and hours labels on Records tab of the right sidebar
  
• [fix] Correct import error resulting in invalid elapsed times and impossibly high AHI values
  

Changes and fixes in OSCAR v1.1.0-testing-2
NOTE: Translations have NOT yet been updated for these changes
Portions of OSCAR are © 2019 by The OSCAR Team

• [new] Show progress bar when the Statistics page has to refresh the cache with more than 180 days in it
  
• [new] Romanian language is supported
  
• [fix] Show commit id in the title bar for testing and beta builds
  
• [fix] Show BMI label and calculated value only when both weight and height are non-zero
  
• [fix] Improve BMI display in Daily/Notes
  
• [fix] Correct profile dialog to show height is measured in cm, not meters, when units system is metric
  
• [fix] Always show event indices on the Daily page even when some event flags are turned off
  

Changes and fixes in OSCAR v1.1.0-testing-1
NOTE: Translations have NOT yet been updated for these changes
Portions of OSCAR are © 2019 by The OSCAR Team

• [new] Offer migration if a non-default directory is selected on first use
  
• [new] Hold the SHIFT key down when starting OSCAR to use Software Graphics Engine
  
• [new] Support for DreamStation BiPAP autoSV (900X) should now be complete
  
• [new] Improved DreamStation support
  
• [new] Improve oximeter import for CM550D+
  
• [new] Disable Dark Mode on Mac
  
• [new] Show hours/day constituting compliance on the Statistics page
  
• [new] Better order of graphs on the Daily page for newly created profiles
  
• [new] Help/System Information shows info about OSCAR, OS, and data location
  
• [new] Move pie chart option from Preferences dialog to View menu
  
• [new] Hide pie chart when capturing screen
  
• [new] The --datadir option now allows fully qualified name on Windows
  
• [fix] Fix some oximeter import issues
  
• [fix] Use local time rather than UTC in oximeter import
  
• [fix] Improve screen capture on Mac
  
• [fix] Fix crashes in CPAP data rebuild, purging of a machine
  
• [fix] Prevent crash if taking a screenshot before a profile is opened
  
• [fix] Increase mask vent ranges
  
• [fix] Correct session bar if no sessions are present
  
• [fix] Correct months shown on the Statistics page monthly view
  
• [fix] Compute compliance on the Statistics page based on total days, not days used
  
• [fix] Paginate the Statistics report when printing
  
• [fix] Fix "phantom date" (12/31/1969) on some ResMed imports
  
• [fix] Default font substituted when a specified font is not valid
  
• [fix] Change Preferences measurement units choice to Metric or English
  
• [fix] Improve display of cmH2O numbers
  
• [fix] Show graphics engine in title bar correctly
  
• [fix] Adjust the size of the Preferences dialog to fit smaller screens
  
• [fix] Label climate control as manual or auto correctly on ResMed import
  
• [fix] Move less useful information from title bar to Help/System Information
  
• [fix] Change "Prescription Settings" to "Machine Settings" message
  
• [fix] Improve icons, especially smaller ones
  
• [fix] Correct Mac menu issues
  
• [fix] Improve messages in debug pane
  
• [fix] Re-organize build instructions and other cleanup 
  

The OSCAR team is a group of volunteer developers from the Apnea Community and are members from multiple forums and nationalities.

OSCAR is always looking for help: programmers, testers, or translators.
Send a private message to 'Bonjour' on the Apnea Board Forum if you are interested.

[dickydutch]

Where's the best place to report an issue I'm having with Oscar?

It happened in the previous version but I held off reporting it in case it was fixed in v1.1.0, but it's still happening.

On the overview page, some days pressures are reported as gibberish. Purging the day and re-importing doesn't help, but the daily page _does_ show the correct data.

I've attached a couple of screenshots to show this, both relate to last night, 18th April:
(The gap on 5th March was when I was in for a sleep study, so no data that night, and 20th Feb is another example of incorrect pressure data in the overview page, but correct data on the daily page)




System details:
macOS Calalina 10.15.4
16GB RAM
Oscar v1.1.0

Resmed Airsense 10 Autoset - SW Version SX567-0401

[pholynyk]

Only the Daily page is attached; please repost any additional images.
Can you describe the gibberish? Does it look like a long negative number?

[DeepBreathing]

The pressure graph from the overview page is there, just above the daily. Above the pressure, EPAP is given as -34028........ about 30 or 40 digits.

[pholynyk]

Thanks DB, I didn't notice there were two images touching.

And yes, that is the infamous long negative number. We'll look into that. I think we have some sample data, but I'm not sure.

[dickydutch]

Let me know if you want me to send you a zipped copy of my SD card.

My fault about the touching images - manually editing BBcode to insert the images from Amazon S3 while resizing the thumbnails and forgot to ensure clear space between them!

Rich.

[pholynyk]

To be sure I have a sample data set, please create a zip using the OSCAR menu->Help->Troubleshooting->Create zip od CPAP data card and then upload it to bonjour's Dropbox at https://www.dropbox.com/request/6VeFzBXa4qZ37EgphL5b

I can get it from him and catalogue it on my system.

thanks

[Crimson Nape]

dickydutch - Was this data imported from the previous version of OSCAR? If so, try creating a new profile and import the data from the SD card instead of the previous version. See if the problem still exists.

[dickydutch]

Last night's data was imported using the new version of Oscar.

It seems the Help > Troubleshooting > Create zip of CPAP data card is creating a zip structure with a folder named for the SD card, but no data within it.

I've manually zipped the card data and uploaded it to Bonour's dropbox.

Rich.

[dickydutch]

Oddly, I tried creating a new profile, and importing from the folder I unzipped, and it's all good, both days with dodgy overview data are now good.

I then went back to the original profile, purged today's data, and re-imported from the folder, and it's good too. I wonder if there's some odd interaction between my USB-C adaptor (has 3 USB3, SD, Micro SD, Network, headphones and HDMI interfaces) and Oscar causing bad data occasionally?

Tell a lie, all the data looked good, but then I quit Oscar and relaunched it, and several days are now missing correct pressure information in the overview.

However, creating a new profile and importing the data, all dates are good, and quitting Oscar and re-launching seems fine. (I've disabled the preferences to compress the SD card backup and compress session data)