[Product Review] Weinmann SOMNObalance e

[DOOM_NX]

I'm reuploading all the photos I have from this machine to Google Drive for the sake of completeness...

https://drive.google.com/drive/folders/0...sp=sharing

BTW, I bought the JOYCE SilkGel that came with that machine after using ResMed Mirage FX for a while. The Mirage FX fell apart and it wasn't all that comfortable in the first place. I still use the JOYCE SilkGel, but after trying the new ResMed AirFit N20, I think it's time to retire it. The N20 is so much lighter and it doesn't press on my forehead. Also I don't have to tighten it as much to get a good seal, so my nose should be less sore.

[Costas P]

Mirage FX didn't "work" for me either!...

It needed lots of tightening an still it had some leaks, plus it was to "narror" to fit my nose in it. A bit noisy too!...
Finally, I tested F&P Eson (large) and that was it!... Perfect from every aspect: lightweight, excellent fit without the need for extra tightening, extremelly easy to breath, 360 degrees rotation of the hose inlet (!!!...) and super silent!... Even the exhilation air is silent too!


Costas

[yrnkrn]

FYI, while the power plug for both Weinmann SOMNObalance e and the Prisma SMART looks artificially similar to common laptop plug it is in fact different due to the inner pin size. The laptop plug will not plug in since it has a larger inner pin (1.3mm vs 1.0mm).

The plug for the Weinmann machines is very likely JEITA RC-5322 JCBP1 6.5/6mm x 4.1mm x 1mm (inner pin).
Compared with the various laptop and barrel plugs the JCBP1 is quite hard to get.