ResMed AirSense 10 AutoSet For Her - BRICK???

[Jeff8356]

...Then I reformatted the sd card. 

Well, I am using an old 1GB sd card I had lying around....

How did you format the SD card?  A 1GB card should be FAT16, anything 2GB to 32GB should be FAT32.  It's possible your xPAP machine just can't read/write to the card if you used Windows (NTFS) or Mac (APFS/HFS+) type formats.

[jaswilliams]

Ok. I deleted the cpap info on the sd card. Then I reformatted the sd card. Then I copied the info from my cpap again. Same response from OSCAR.

Well, I am using an old 1GB sd card I had lying around. So I guess I'll try a new and larger sd card. I'll keep you posted.

You need to use the machine with the SD card in it as the detailed information is written directly to the card. If you haven’t used the machine with the SD card in it then only the summary info you have there is displayed

[courtlight]

Yaaayyyy!!!! 
I didn't realize you needed to leave the sd card in while you are asleep. 
I thought you could insert the sd card the next day and it would copy the info. 
Ok, so now we're in business. 
(Also I used a new 32gb sd card)
Thank you so much for everyone's help!!!!!

[horsepower]

FWIW, thats a pretty good looking graph!

[Sleeprider]

I think simply changing minimum pressure to 7.0 will result in even more comfort with less pressure fluctuation, but it's awful hard to argue with 0.0.

[DeepBreathing]

Hi courtlight. Congratulations for nothing! A 0.0 is always good to see.

By the way, if you set your charts up according to these instructions you'll see a lot more usable data.