Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

PRS 560 time zone changes on travel
#1
PRS 560 time zone changes on travel
I will be travelling for a couple of weeks in a country 7 time zones ahead of my home and I am not sure how the CPAP machine handles the data collected as regards time of day. Does all data simply get stored and reported using my home time zone?
Is there a setting I need to change?
Post Reply Post Reply
#2
RE: PRS 560 time zone changes on travel
You have a PR so it is set to UTC anyway, not your home zone. It will always report the same time, no matter where you are. Which is good since you can't set the clocks on those machines anyway.

http://www.timeanddate.com/worldclock/converter.html
http://www.timeanddate.com/worldclock/di...ml?p1=1440
http://www.timeanddate.com/worldclock/timezone/utc
PaulaO

Take a deep breath and count to zen.




Post Reply Post Reply
#3
RE: PRS 560 time zone changes on travel
Do I have to adjust the sleepyhead software for the reports to be "normal?
Post Reply Post Reply
#4
RE: PRS 560 time zone changes on travel
Sleepyhead will work off the system clock. So if you change your computer's timezone, sleepyhead will adjust to that timezone. It also means that your data for days in the original time zone will shift to seemingly odd hours. But its just the view that changes. The underlying data stays the same (all captured in a UTC timezone by the PRS1 machine).
PRS1 Auto & Dreamstation Auto w/ P10 and straight pressure of 8cm
Post Reply Post Reply
#5
RE: PRS 560 time zone changes on travel
I spent some time in South Korea where the time zone was across the international date line +17 hours from my home. My advise would be just use the machine, enjoy the trip and don't worry about it. It is going to get way too complicated if everytime you take a trip across time zones you start adjusting the time in SH. The time of day aspect of the data is pretty trivial, and it's easier to just consider the start and ending times as markers.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#6
RE: PRS 560 time zone changes on travel
I traveled to Japan last December with my PRS560. I let my MacBook change time to local. Everything looked strange in SleepyHead as the previous data shifted and the data collected in Japan looked right. When I got back to the Atlanta area my MacBook changed back to my normal timezone. The Japan collected data looked shifted relative to the Atlanta data (like I slept during the day instead of at night for a week.)

Ultimately, it's no problem. I just kept notes in SleepyHead to remind me why things looked different. If you have compliance requirements you might want to think about the time changes versus the apparent gaps that might appear. I used my machine overnight before I left Japan waking up normally on Saturday morning there. I traveled to the Atlanta area arriving late afternoon on the same Saturday. I used the machine Saturday night in Atlanta. Due to the time change and the flight duration, it now looks like I did not use the machine on Friday night. It is not intuitive, and depends on where you have SleepyHead divide day data (12PM default).

If you are really concerned, I can take a screenshot of my resulting SleepyHead "Session Times" chart. Send me a PM.

Cheers,
Brian

Post Reply Post Reply
#7
RE: PRS 560 time zone changes on travel
One fix is to set the laptop's clock to UTC. I just checked and my HP running Win 7 can do that. It won't adjust to whatever local time you go through when you connect it to the wifi (which is what changes the time). Or, just put it back on the home time zone just when you are downloading your data. Just right click the clock area on the taskbar if you have Windoze. Not sure how to do it on a Mac.
PaulaO

Take a deep breath and count to zen.




Post Reply Post Reply
#8
RE: PRS 560 time zone changes on travel
Thanks to all. I have awhile before I go and so I will think on this. I don't think I will have compliance issues because I am only trying to satisfy Medicare and I use it every night, all night. During travel I plan on using a Netbook which I only use for travel.
1- copy my SH files to blank SD card just before travel
2- record travel data to this SD downloading to the Netbook in local time.
3- once home, run SH into my home time zone
4- save that travel data which should then be in my home time zone
5- copy only the travel data from the Netbook to my home computer.
I'm thinking this might keep all my SH data in the same time zone.

I'll report back sometime in June after I take my trip.
Post Reply Post Reply
#9
RE: PRS 560 time zone changes on travel
You know the data is for you, right? No one else will ever look at it or care what time zone it occurred in. If your DME is monitoring compliance, all they care about is hours per session. The start and end times don't count. Data is a great motivator and information soruce for keeping treatment optimal, but don't let it become an obsession. Have a nice trip.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#10
RE: PRS 560 time zone changes on travel
(03-06-2015, 11:00 PM)on the virge Wrote: I will be travelling for a couple of weeks in a country 7 time zones ahead of my home

OK, this is off topic, but since you will be 7 hours ahead of everyone, please check out the winning PowerBall numbers Wednesday or Saturday evening there and send them back to me. I figure can get the winning ticket bought in the seven hour window and we can split the jackpot...

OMM
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  UARS? Time to start therapy mpz12 1 154 11-25-2024, 10:21 PM
Last Post: gainerfull
  First time user, what settings should I tweak? sleeper build 2 213 11-16-2024, 11:50 AM
Last Post: sleeper build
  [Treatment] My first time logging CPAP Data dblock01 13 652 11-16-2024, 08:35 AM
Last Post: SarcasticDave94
  First time therapy, settings and progress Schernenk 161 9,324 11-09-2024, 08:22 PM
Last Post: Jay51
Angry FALL BACK TO STANDARD TIME srlevine1 6 386 11-03-2024, 09:21 PM
Last Post: SarcasticDave94
  Need help with TIME AT PRESSURE chart Poolboy 1 166 11-03-2024, 04:17 PM
Last Post: Crimson Nape
  myAir when sleep time is 4am to 4pm the next day iknownothing 2 623 10-03-2024, 05:19 AM
Last Post: iknownothing


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.