That did not help I still get the error.
I am uninstalling ResScan, rebooting and reinstalling without Drivers.
Hello Guest,
Welcome to Apnea Board !
ResScan CPAP Reporting Software (OLD version: 5.5) [Archived Discussions]
|
03-22-2012, 07:00 PM
RE: ResScan CPAP Reporting Software (current version: 3.16)
You just right click on them and Uninstall them.
That did not help I still get the error. I am uninstalling ResScan, rebooting and reinstalling without Drivers.
03-22-2012, 07:06 PM
RE: ResScan CPAP Reporting Software (current version: 3.16)
Also, make sure your ResScan install file didn't get corrupted during the download. It's best to download during low-traffic times (after 11 pm and before 9 am locally) to avoid bottlenecks and possible file corruption or incomplete downloads.
The install file (for this version) should be 95.3 megabytes in size.
SuperSleeper
Apnea Board Administrator www.ApneaBoard.com INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
DONATE to Apnea Board
Change your own pressure - Get the Clinician Setup Manual for your CPAP here OSCAR - Open Source CPAP Analysis Reporter
03-22-2012, 07:47 PM
RE: ResScan CPAP Reporting Software (current version: 3.16)
(03-22-2012, 07:06 PM)SuperSleeper Wrote: Also, make sure your ResScan install file didn't get corrupted during the download. It's best to download during low-traffic times (after 11 pm and before 9 am locally) to avoid bottlenecks and possible file corruption or incomplete downloads. Does not appear to be corrupted. It is: 31302_ResScan_3.16_SP1.exe size 97,549 KB I will uninstall it and try to load an older version as this one seems to be dorked.
03-22-2012, 08:52 PM
RE: ResScan CPAP Reporting Software (current version: 3.16)
(03-22-2012, 07:47 PM)svwilbur Wrote: Does not appear to be corrupted. It is: FYI... when you're going to another version, the previous one is 3.14.. there was no ver. 3.15.
SuperSleeper
Apnea Board Administrator www.ApneaBoard.com INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
DONATE to Apnea Board
Change your own pressure - Get the Clinician Setup Manual for your CPAP here OSCAR - Open Source CPAP Analysis Reporter
03-22-2012, 09:10 PM
RE: ResScan CPAP Reporting Software (current version: 3.16)
There is no 3.12, 3.13, 3.14, 3.15, 3.17, 3.18, 3.20 or whatever on the web. I was just trying to change the URL where it has the 3.16 to another version and those all came up as not found.
I did try installing the same 3.16 on a Windows7 laptop and that works. But it is kind of buggy on the screen input. See this thread named: "ResScan Data Download Problem" Thread-ResScan-Data-Download-Problem?highlight=borland and post on there: 12
RE: ResScan CPAP Reporting Software (current version: 3.16)
There does not appear to be any other version available from ResMed just the 3.16 one.
03-27-2012, 11:38 AM
RE: ResScan CPAP Reporting Software (current version: 3.16)
I downloaded the software today on my Win7 64 notebook. It was quick and without any complications. It installed without a hitch and I was able to read my files from the data card reader.
Thank you very much.
03-27-2012, 01:51 PM
RE: ResScan CPAP Reporting Software (current version: 3.16)
(03-22-2012, 09:16 PM)svwilbur Wrote: There does not appear to be any other version available from ResMed just the 3.16 one. The instructions have been updated to include some older versions also. Might have to re-request the email again.. the update was done over this past weekend.
SuperSleeper
Apnea Board Administrator www.ApneaBoard.com INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
DONATE to Apnea Board
Change your own pressure - Get the Clinician Setup Manual for your CPAP here OSCAR - Open Source CPAP Analysis Reporter
03-27-2012, 07:36 PM
RE: ResScan CPAP Reporting Software (current version: 3.16)
I wished this software was available for a Mac. *Sigh* It would be nice to have software options.
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
04-10-2012, 08:17 PM
RE: ResScan CPAP Reporting Software (current version: 3.16-SP1)
I am really new at this and need some help. Got the ResMed software but don't seem to be able to get anything except the compliance graph and the one that shows the length of use each nite. I am really interested in getting the AHI data, but don't seem to be able to figure out where this is??
|
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
How To install prisma ts software ? | Amir Eid | 14 | 10,785 |
6 hours ago Last Post: Crimson Nape |
|
Lowenstein reporting - do I have CAs or not? What is my real AHI? | jimbobule | 0 | 86 |
11-30-2024, 02:27 PM Last Post: jimbobule |
|
Resvent iMatrix Software & Firmware Update for iBreeze machines | SuperSleeper | 6 | 2,839 |
11-20-2024, 05:08 AM Last Post: LunarDrift |
|
please help me to find software for respicare 25 bpap machine thank you | sangamesh | 1 | 965 |
10-24-2024, 10:09 AM Last Post: Aldo Herrera |
|
NOTICE: ResScan 7.1 Software now available [for ResMed machines only] | SuperSleeper | 8 | 5,910 |
10-18-2024, 01:45 PM Last Post: SuperSleeper |
|
New SEFAM Analyize software version 3.2.0 | SuperSleeper | 5 | 2,611 |
10-06-2024, 06:24 AM Last Post: DrJelly |
|
Software for Bipap Machine | HoodedRobin | 7 | 1,345 |
09-28-2024, 09:39 AM Last Post: sinanacar |