Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Resmed Aircurve 10 S mode to Vauto
#1
Resmed Aircurve 10 S mode to Vauto
I would like to try my Reamed 10  from  S to Vauto mode. Do I leave the ipap epap settings as they are (18/13) or do they need to be changed? Please don't be too hard on me I struggle with complex issues after my coma. Oscar data of settings as they are now.


Attached Files Thumbnail(s)
   
Post Reply Post Reply
#2
RE: Resmed Aircurve 10 S mode to Vauto
To achieve the same pressure as the S mode, set the EPAP to 13, IPAP Max to 18, and the PS to 5.
- Red
Crimson Nape
Apnea Board Moderator
Project Manager for OSCAR - Open Source CPAP Analysis Reporter
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#3
RE: Resmed Aircurve 10 S mode to Vauto
Thank you!
Post Reply Post Reply
#4
RE: Resmed Aircurve 10 S mode to Vauto
I need to thank you and everyone else again. I have learned more here in a week than I have from day one almost three years ago.
Last night was wonderful with no morning headache. I wish I knew this from the start when the therapist at rehab set me up with my
first machine. My blood oxygen levels were dropping into the 60s and 70s even on the bipap. Was 6 months before it was corrected to 
something better. It definitely hindered my recovery from the coma. I'm pretty happy with last nights data. But if you see anything please let me know


Attached Files Thumbnail(s)
   
Post Reply Post Reply
#5
RE: Resmed Aircurve 10 S mode to Vauto
Post some recent OSCAR Reports. We might be able to fine tune this Mode of operation for you.

Eat-popcorn
Post Reply Post Reply
#6
RE: Resmed Aircurve 10 S mode to Vauto
If your O2 levels are under 88 for any length of time you would need to add oxygen to your Cpap. You need to talk to your Doctor.
Apnea (80-100%) 10 seconds, Hypopnea (50-80%) 10 seconds, Flow Limits (0-50%) not timed  Cervical Collar - Dealing w DME - Chart Organizing
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  airsense/aircurve interchangeability info eok361 1 27 21 minutes ago
Last Post: Crimson Nape
  Vauto PRESSURES vishaldasari 17 321 2 hours ago
Last Post: Sleeprider
  AirCurve power question Shamus54 0 36 6 hours ago
Last Post: Shamus54
  AirCurve power problem Shamus54 0 48 Yesterday, 08:24 PM
Last Post: Shamus54
  airsense 10/11 aircurve 10 heated tube only eok361 0 122 11-19-2024, 11:30 PM
Last Post: eok361
  New Bi Level AC/11 VAUTO skcampbell2 20 1,352 11-17-2024, 05:23 PM
Last Post: skcampbell2
  Help with ASVAuto ResMed AirCurve 10 settings (and esophageal pain) RowG 2 173 11-17-2024, 08:34 AM
Last Post: RowG


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.