SleepyHead disappearing data??

[Lanco]

I'm wondering at what point the issue is here, the machine, the SD card, SleepyHead or my computer? Anything I can do to prevent it? I know that at least the Daily shot originally had all the info there.

[img][/img]

[img][/img]

[img][/img]

[img][/img]

[Lanco]

Happened to remember I posted one shot with all the data on it previously:

[img][/img]

[Beej]

Start with the basics:
Have you tried closing and re-opening the program?
Have you tried rebooting your computer?
What, if any, other programs are open concurrently?
How old is the monitor/computer?

[Lanco]

Here is one other thing. When I first turn it on the bottom of the screen has this on all screens until I manually move it down.

[img][/img]

[Lanco]

Start with the basics:
Have you tried closing and re-opening the program?
Have you tried rebooting your computer?
What, if any, other programs are open concurrently?
How old is the monitor/computer?

Have tried all of that. It happens whether there's something else open or not.

One thing, when I updated to Windows 10 it turned out that I was told I need a new graphics card. As it is it works but things are a tad off like circles are not round but have a slight oval shape.

When I installed SleepyHead it said that the program would only work if I used "brokenGL", so that is what I'm using.

The monitor and computer should be no problem my wife says who has built computers.

One thing I might add is wondering if the old graphics card would mess with the data I tried it also on a laptop and all data was identical.

[Beej]

So all that is ruled out.
Have to ask the programmer at this point.

[AlanE]

Here is one other thing. When I first turn it on the bottom of the screen has this on all screens until I manually move it down.

On the menu, go to Help and uncheck Show Debug Pane.

[AlanE]

Next on the menu I would try going to Data > Rebuild CPAP Data and select your machine. follow the prompts.



It may or may not repair your graphs.

[Lanco]

Here is one other thing. When I first turn it on the bottom of the screen has this on all screens until I manually move it down.

On the menu, go to Help and uncheck Show Debug Pane.

it worked. Thanks.

[Lanco]

Next on the menu I would try going to Data > Rebuild CPAP Data and select your machine. follow the prompts.



It may or may not repair your graphs.

I got this warning. Can you tell if it's set ok as far as the backup setting so it's safe to do this or did I miss something? I'd hate to lose what I do have and the little bit that's missing is no big deal but would be nice to have. What do you think?

[img][/img]

[img][/img]

[img][/img]