06-06-2014, 02:48 PM
Pressure reset for ResMed Escape II
Hello Guest,
Welcome to Apnea Board !As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
Apnea Board Forum - CPAP | Sleep Apnea
/
Public Area
/
Main Apnea Board Forum
/
Pressure reset for ResMed Escape II
/
Pressure reset for ResMed Escape II
|
Pressure reset for ResMed Escape II
|
dbenfield86
Posts: 2 Threads: 1 Joined: Jun 2014
Machine: ResMed Escape II 
zonk
Posts: 8,023 Threads: 243 Joined: Feb 2012
Machine: A10 AutoSet
06-06-2014, 04:25 PM
RE: Pressure reset for ResMed Escape II
(06-06-2014, 02:48 PM)dbenfield86 Wrote: I can't find instructions for the ResMed Escape II CPAP. Can someone please point me to the right place? I'm attaching a picture of the machine.If not mistaken, it looks like an S8 to me, You can ask for the clinical manual via Email, scroll down to section three (ResMed S8 Escape) http://www.apneaboard.com/adjust-cpap-pr...tup-manual Press the right and down arrows simultaneously for about 3 seconds until the word "clinical" appears. Select Menu, then use the left and right arrows to cycle through the settings. Use the up and down arrows to make adjustments. S8 setup video from CPAP library: http://vimeo.com/19565675
trish6hundred
Posts: 8,263 Threads: 6 Joined: May 2012
Machine: Resmed AirSense 10 AutoSet For Her
06-06-2014, 06:49 PM
RE: Pressure reset for ResMed Escape II
Hi dbenfield86,
WELCOME! to the forum.! Hang in there for more responses to your post and best of luck to you.
trish6hundred
dbenfield86
Posts: 2 Threads: 1 Joined: Jun 2014
Machine: ResMed Escape II
06-06-2014, 07:25 PM
RE: Pressure reset for ResMed Escape II
Thank you. As it turns out I found a pdf document elsewhere online that explains how to get into the settings of my ResMed S8. I tried it and I think it worked, we'll see. I have the opposite problem of most folks, it seems. The pressure is too high and it starts pushing air out between my skin and the mask and it wakes me up and keeps my light-sleeping wife awake. I need to lower the ramp max pressure. I find that I don't need a lot of pressure for my apnea, I guess it's not so severe.
zonk
Posts: 8,023 Threads: 243 Joined: Feb 2012
Machine: A10 AutoSet
RE: Pressure reset for ResMed Escape II
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Reset A10 to factory default | PaulaO2 | 7 | 216 |
10 hours ago Last Post: PaulaO2 |
|
| Low vs high pressure Resmed | sleep4 | 2 | 135 |
11-22-2024, 01:20 PM Last Post: staceyburke |
|
| pattern in high resolution mask pressure in resmed device | rberry1 | 1 | 301 |
09-11-2024, 07:51 PM Last Post: Deborah K. |
|
| Is it normal for Resmed 10 blowing noise to be very noticable at high pressure >13 | snortle | 4 | 392 |
08-29-2024, 09:49 PM Last Post: SarcasticDave94 |
|
|
Z2 pressure vs Airsense11 pressure | jwalker5 | 2 | 288 |
08-17-2024, 12:11 PM Last Post: jwalker5 |
| [Pressure] Resmed Aircurve 10s - pressure and leaks | ManGoLine | 0 | 245 |
08-12-2024, 01:08 PM Last Post: ManGoLine |
|
| Z2 increases pressure on leak; ResMed 11 doesn't | SkySleep | 7 | 407 |
07-13-2024, 11:52 PM Last Post: SkySleep |
|
Apnea Board Forum - CPAP | Sleep Apnea
/
Public Area
/
Main Apnea Board Forum
/
Pressure reset for ResMed Escape II
/
Pressure reset for ResMed Escape II
