Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Air leaks with Aircurve 11 ASV for CA
#1
Air leaks with Aircurve 11 ASV for CA
I am wondering if you all have any advice with regard to my air leaks. I have included two nights data with my Aircurve 11. First was 9.5 hours on machine which was a record (but aided by some jet lag and an ambien). Second was the following night of about 5 hours on. I am getting quite a bit of aerophagia and it looks like quite a few air leaks. Also included a screenshot of my settings.


Attached Files Thumbnail(s)
           
Post Reply Post Reply
#2
RE: Air leaks with Aircurve 11 ASV for CA
Those are a lot of mask leaks.  They look to be mainly mouth leaks and not mask leaks.  Mouth leaks go on a long time.  Mask leaks are quick spikes up; then drop back down.  

Here is some reading from our Wiki on how to stop mask leaks:  
  • Mask Primer
    Higher pressure(s) on average can increase mask leaks.  Hopefully the "Mask Primer" has some tips that help.  If not you could try to reduce the max pressure slowly and see if you can bring it down any without negatively affecting your therapy.  
Download OSCAR
OSCAR Chart Organization
Attaching Files

Advisory Members serve as an "Advisory Committee" to help shape Apnea Board's rules & policies. 

Membership in the Advisory Members group does not imply medical expertise or qualification for advising Sleep Apnea patients concerning their treatment.  
Post Reply Post Reply
#3
RE: Air leaks with Aircurve 11 ASV for CA
Thanks. That makes a lot of sense and fits what I think I’m experiencing in the night which is a lot of air filling my mouth. I’m using the ResMed N30i nasal mask and I tape my mouth shut with hostage tape. I’ve been using the dreamware nasal mask for years on the Philips ASV and haven’t had this issue but have not been getting good therapy with the Philips. I have not tolerated the full face masks in the past due to skin irritation on my face. Is it worth trying to taper my maximum pressure to see if that helps?
Post Reply Post Reply
#4
RE: Air leaks with Aircurve 11 ASV for CA
I used an Aircurve 10 ASV for about 8 months. The mask kept leaking with the default settings that were too high. It wasn't untill I reduced the pressures to;

Min. EPAP 7.0
Max IPAP 16.0
P.S. 3.0-8.0

No more leaks, and average AHI of under 1.5 down to 0.0. I was using it for regular obstructive sleep apnea and irregular breathing. I was mis-diagnosed with complex sleep apnea. There were no true centrals. As you may have read, too high a pressure can cause CSA's.
Post Reply Post Reply
#5
RE: Air leaks with Aircurve 11 ASV for CA
However, you can use High pressure on the ASV and won't get CA, because the ASV is specifically used to treat CA. You do want to get the leaks under control, as even the ASV could not keep up once leaks pass over the 24 L/Min threshold.

It would be the better answer to address leaks than lower pressures and risk hindering therapy. You may find your mask or mouth leaks persist even on low pressure.
Mask Primer

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#6
RE: Air leaks with Aircurve 11 ASV for CA
How long has it been since you tried a full face mask? What didn't work in the past may work now. You may have to go through the process of trying several to find the one that works for you, but it seems a full face mask is your only solution.

I realize you went with a nasal mask in the past that worked for you but our minds and bodies change, and it appears you have morphed into a full on mouth-leaker. A full face mask that fits will be a game-changer for you.

Mouth-leaking may or may not not disrupt your therapy, depending on how bad it is; but even if it's not bad enough to disrupt your therapy, it disrupts your sleep.
Sleepster

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#7
RE: Air leaks with Aircurve 11 ASV for CA
Thanks for all of the input. It has been a couple of years since I used the full face mask. My biggest issue was fighting a face rash where it contacted. I tried using the mask liners but those just seemed to result in more air leaks around the mask.
Post Reply Post Reply
#8
RE: Air leaks with Aircurve 11 ASV for CA
I can't guarantee this will help sensitivity and rashes, but I'm a big fan of the Fisher and Paykel masks. They've got all 4 types, nasal pillow, nasal, full, hybrid. They all go on with light tension. I tried a few ResMed masks and it didn't work as easy as F&P.
Mask Primer

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#9
RE: Air leaks with Aircurve 11 ASV for CA
Okay, thank you. I will definitely look at those. I have only tried the Philips and ResMed masks
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  [Treatment] BIPAP Settings - ResMed AirCurve 11 Vauto dcbauman 8 241 6 hours ago
Last Post: Sleeprider
  Aircurve VAuto PS...pros & cons WW4B 1 91 Yesterday, 01:24 AM
Last Post: SarcasticDave94
  Leaks and mask displacement for side-to-stomach sleepers. Tape down nasal pillows? Bostonsnow 12 1,589 12-07-2024, 03:06 PM
Last Post: dsjstc
  I need Help with AirCurve 11 settings. skcampbell2 2 158 12-07-2024, 02:19 PM
Last Post: skcampbell2
  airsense/aircurve interchangeability info eok361 2 153 11-30-2024, 12:22 PM
Last Post: eok361
  AirCurve power question Shamus54 0 130 11-30-2024, 05:04 AM
Last Post: Shamus54
  AirCurve power problem Shamus54 0 114 11-29-2024, 08:24 PM
Last Post: Shamus54


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.